• HQ - 14480 Yorba Ave., Chino, CA 91710
  • 1-800-213-4528
ProductsInstrumentationConductivity/Resistivity

Conductivity/Resistivity

Conductivity/Resistivity

67 products found

Show products per page

Sort By:

Select products then
Change Display:

Showing 41 - 67 of 67

<< Prev Page 2 of 2

Go to page:

Filter Products
Secondary Sub Category
Manufacturer
Series
Type of product
Connection Material
Maximum PSI
Connection Size
Cell Constant
Number of Inputs
Number of Outputs
Connection Type
Type of Outputs
Cable Length
Thread Type
Electrode Type
Insertion Depth
Body Material
Electrode Material
Temperature Compensation
Item # and Description
Manufacturer
Price
Water Analytics
Not Available
The AM3422 sensors offer a compact design that allows installation into standard pipe fittings in small line sizes such as 3/4" and 1", avoiding the need for special flow cells. Simplicity of the design also allows them to be economically offered in exotic metals for especially corrosive chemical applications.

Wetted materials of construction are 316 stainless steel and Teflon®, with double o-ring seals at all points. The outer EPDM o-ring bears the brunt of process interface, allowing the back o-ring to maintain reliable sealing free from chemical attack. An integral temperature element tailored to the analyzer of choice allows automatic compensation for maximum accuracy. Leads are 10' standard, stripped and tinned ends or optional spade lugs.

Process connections are made via a bored through swage fitting with 1/2" or 3/4" NPT threads. This fitting can be screwed into a line, or tank and it can also be turned around and connected to a standpipe for use in a submersion configuration. The AM322 is good for general purpose and covers a broader range of conductivities.

The AquaMetrix AM3422 series is ideal for the following applications:
  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage
Water Analytics
Not Available
AquaMetrix Model AM3444 sensor was deigned for high pressure, high temperature conductivity measurements, and is an ideal choice for boiler control applications, blowdown control, condensate monitoring, leak detection on heat exchangers and steam purity measurements.

Wetted materials of construction are 316 stainless steel, PEEK and EPDM o-rings. All possible leak paths through the sensor are double sealed with o-rings for maximum on-stream reliability. Hot water is a severe environment for any elastomer and the front seals bear the brunt of chemical attack, allowing the back seals to remain relatively unaffected.

Model AM3444 high temperature conductivity sensor is ideal for the following applications:

  • Boiler Condensate
  • Blow-Down Control Without Coolers
  • Cooling Towers
Water Analytics
Not Available
AquaMetrix Model AM3444 sensor was deigned for high pressure, high temperature conductivity measurements, and is an ideal choice for boiler control applications, blowdown control, condensate monitoring, leak detection on heat exchangers and steam purity measurements.

Wetted materials of construction are 316 stainless steel, PEEK and EPDM o-rings. All possible leak paths through the sensor are double sealed with o-rings for maximum on-stream reliability. Hot water is a severe environment for any elastomer and the front seals bear the brunt of chemical attack, allowing the back seals to remain relatively unaffected.

Model AM3444 high temperature conductivity sensor is ideal for the following applications:

  • Boiler Condensate
  • Blow-Down Control Without Coolers
  • Cooling Towers
Water Analytics
Not Available
AquaMetrix Model AM3444 sensor was deigned for high pressure, high temperature conductivity measurements, and is an ideal choice for boiler control applications, blowdown control, condensate monitoring, leak detection on heat exchangers and steam purity measurements.

Wetted materials of construction are 316 stainless steel, PEEK and EPDM o-rings. All possible leak paths through the sensor are double sealed with o-rings for maximum on-stream reliability. Hot water is a severe environment for any elastomer and the front seals bear the brunt of chemical attack, allowing the back seals to remain relatively unaffected.

Model AM3444 high temperature conductivity sensor is ideal for the following applications:

  • Boiler Condensate
  • Blow-Down Control Without Coolers
  • Cooling Towers
Water Analytics
Not Available
The AquaMetrix AM3455 series sensors are welded to blind flanges and can be inserted into standard tee fittings in sanitary systems using ladish or tri-clover fittings.

Wetted materials of construction are 316L stainless steel and Teflon®, with double redundant EPDM o-rings. The process side o-ring is the only one in contact with the stream, allowing the back o-ring to maintain reliable sealing, free from chemical attack. Temperature compensation elements are potted in the body itself. Leads are 10' standard.

Process connections are tri-clamp sanitary flanges of customer specified size. The insertion depth can be modified upon request to obtain proper positioning in a specific installation. The sensor is built for clean in-place service, either stream or sterilizing chemicals. All wetted materials are FDA compliant and USP Class VI is available.

Series AM3455 stainless steel sanitary conductivity sensors are ideal for the following applications:

  • Food and Beverage
  • Dairy
  • All Sanitary Applications
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
Water Analytics
Not Available
The AquaMetrix AM3455 series sensors are welded to blind flanges and can be inserted into standard tee fittings in sanitary systems using ladish or tri-clover fittings.

Wetted materials of construction are 316L stainless steel and Teflon®, with double redundant EPDM o-rings. The process side o-ring is the only one in contact with the stream, allowing the back o-ring to maintain reliable sealing, free from chemical attack. Temperature compensation elements are potted in the body itself. Leads are 10' standard.

Process connections are tri-clamp sanitary flanges of customer specified size. The insertion depth can be modified upon request to obtain proper positioning in a specific installation. The sensor is built for clean in-place service, either stream or sterilizing chemicals. All wetted materials are FDA compliant and USP Class VI is available.

Series AM3455 stainless steel sanitary conductivity sensors are ideal for the following applications:

  • Food and Beverage
  • Dairy
  • All Sanitary Applications
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
Water Analytics
Not Available
The AquaMetrix AM3455 series sensors are welded to blind flanges and can be inserted into standard tee fittings in sanitary systems using ladish or tri-clover fittings.

Wetted materials of construction are 316L stainless steel and Teflon®, with double redundant EPDM o-rings. The process side o-ring is the only one in contact with the stream, allowing the back o-ring to maintain reliable sealing, free from chemical attack. Temperature compensation elements are potted in the body itself. Leads are 10' standard.

Process connections are tri-clamp sanitary flanges of customer specified size. The insertion depth can be modified upon request to obtain proper positioning in a specific installation. The sensor is built for clean in-place service, either stream or sterilizing chemicals. All wetted materials are FDA compliant and USP Class VI is available.

Series AM3455 stainless steel sanitary conductivity sensors are ideal for the following applications:

  • Food and Beverage
  • Dairy
  • All Sanitary Applications
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
Water Analytics
Not Available
The AquaMetrix AM3455 series sensors are welded to blind flanges and can be inserted into standard tee fittings in sanitary systems using ladish or tri-clover fittings.

Wetted materials of construction are 316L stainless steel and Teflon®, with double redundant EPDM o-rings. The process side o-ring is the only one in contact with the stream, allowing the back o-ring to maintain reliable sealing, free from chemical attack. Temperature compensation elements are potted in the body itself. Leads are 10' standard.

Process connections are tri-clamp sanitary flanges of customer specified size. The insertion depth can be modified upon request to obtain proper positioning in a specific installation. The sensor is built for clean in-place service, either stream or sterilizing chemicals. All wetted materials are FDA compliant and USP Class VI is available.

Series AM3455 stainless steel sanitary conductivity sensors are ideal for the following applications:

  • Food and Beverage
  • Dairy
  • All Sanitary Applications
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
Water Analytics
Quantity: 
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Quantity: 
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Quantity: 
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Call for Availability
The Aquametrix AS series conductivity probe features a choice of 316 stainless steel or graphite electrodes and Noryl shells that will satisfy just about any industrial, power plant or laboratory application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected.

Five cell constants from 0.01 to 10 are available to cover any water sample between pure water and saline conditions. All type are designed with a safety stop shoulder on the cell. Integral automatic temperature compensation is standard on all type and provides compensation to 25° C when used with a compatible analyzer. Users can choose between a 1000 Ω RTD or a 3 kΩ thermistor. Either element is in place to give close thermal contact with the liquid being measured to assure fast response to changing temperature.

Flow-through mounting incorporates a special compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. This design avoids the nuisance of disconnecting the cell cable when installing or removing the cell for cleaning. Submersion mounting is also available, with MHMSC mounting hardware. Ball Valve ("Hot-Tap") types permit removal of the cell from process piping or from tanks without shutting down the system. They are available in CPVC.

Series AS Conductivity Sensor is ideal for the following applications:
  • Cooling Towers
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Food and Beverage
Water Analytics
Quantity: 
The AquaMetrix Series ES-1 toroidal conductivity sensors are used in processes where conventional contacting sensors may become fouled or corroded. Each sensor comes standard with a PT1000 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F).

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receive. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The Series ES-1 Toroidal Conductivity Sensor is ideal for the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food & Beverage


The ES-1 provides a raw signal that requires a third party analyzer for power and signal processing. ES-1 has been compatibility verified for the following: GLI (E33, E53, E63, PRO 3), Knick (2401 Condi, 2402 Condi), Uniloc 1181T, Yokogawa (ISC402), Mettler-Toledo.
Water Analytics
Not Available
The AquaMetrix ES-5 series toroidal conductivity sensor is used in processes where conventional contacting sensors may become fouled or corroded. These probes are unique in the marketplace. They are loop-powered and provide direct 4-20 mA output.

Each sensor comes standard with PT100 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F). The AquaMetrix ES-5 sensor is equipped with 1-1/2" MPT threads on both ends so that they can be mounted for in-flow applications or submersion mounted in tanks or open vessels.

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receiver. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The ES-5 is ideal for use in the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage
Water Analytics
Not Available
The AquaMetrix ES-5 series toroidal conductivity sensor is used in processes where conventional contacting sensors may become fouled or corroded. These probes are unique in the marketplace. They are loop-powered and provide direct 4-20 mA output.

Each sensor comes standard with PT100 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F). The AquaMetrix ES-5 sensor is equipped with 1-1/2" MPT threads on both ends so that they can be mounted for in-flow applications or submersion mounted in tanks or open vessels.

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receiver. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The ES-5 is ideal for use in the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage
Water Analytics
Not Available
The AquaMetrix ES-5 series toroidal conductivity sensor is used in processes where conventional contacting sensors may become fouled or corroded. These probes are unique in the marketplace. They are loop-powered and provide direct 4-20 mA output.

Each sensor comes standard with PT100 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F). The AquaMetrix ES-5 sensor is equipped with 1-1/2" MPT threads on both ends so that they can be mounted for in-flow applications or submersion mounted in tanks or open vessels.

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receiver. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The ES-5 is ideal for use in the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage
Water Analytics
Quantity: 
The AquaMetrix ES-5 series toroidal conductivity sensor is used in processes where conventional contacting sensors may become fouled or corroded. These probes are unique in the marketplace. They are loop-powered and provide direct 4-20 mA output.

Each sensor comes standard with PT100 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F). The AquaMetrix ES-5 sensor is equipped with 1-1/2" MPT threads on both ends so that they can be mounted for in-flow applications or submersion mounted in tanks or open vessels.

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receiver. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The ES-5 is ideal for use in the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage
Water Analytics
Quantity: 
The AquaMetrix ES-5 series toroidal conductivity sensor is used in processes where conventional contacting sensors may become fouled or corroded. These probes are unique in the marketplace. They are loop-powered and provide direct 4-20 mA output.

Each sensor comes standard with PT100 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F). The AquaMetrix ES-5 sensor is equipped with 1-1/2" MPT threads on both ends so that they can be mounted for in-flow applications or submersion mounted in tanks or open vessels.

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receiver. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The ES-5 is ideal for use in the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage
Water Analytics
Quantity: 
The AquaMetrix ES-5 series toroidal conductivity sensor is used in processes where conventional contacting sensors may become fouled or corroded. These probes are unique in the marketplace. They are loop-powered and provide direct 4-20 mA output.

Each sensor comes standard with PT100 RTD temperature device, which provides automatic temperature compensation to 25° C (77° F). The AquaMetrix ES-5 sensor is equipped with 1-1/2" MPT threads on both ends so that they can be mounted for in-flow applications or submersion mounted in tanks or open vessels.

Toroidal conductivity sensors are made up of two-wire wound toroids encapsulated in a potting compound and encased in a plastic body. One toroid acts as a transmitter and the other as a receiver. An electric current is induced between the toroids through the process solution. This current is directly proportional to the conductivity of the process solution.

The ES-5 is ideal for use in the following applications:

  • Plating
  • High Purity Water Applications
  • Pharmaceutical Applications
  • Reverse Osmosis Systems
  • Fume Scrubbers
  • Boilers
  • Cooling Towers
  • Textile Manufacturing
  • Food and Beverage

<< Prev Page of 2

Close Menu