Login | Cart |
Always Available @ 1-800-213-4528
Drum Pump Kit, Includes: (1) EFP-40 Pump, (1) S1 Motor, (1) 3/4" x 8' EPDM discharge hose, (1) set clamps, (1) sealed bung adapter, (1) stainless steel nozzle and (1) 3/4" stainless steel swivel
Item #DEFP009

Pump Features include

  • Polypropylene tube and 316 stainless steel shaft
  • 1.25" tube size
  • 3/4" discharge outlet
  • 40" tube length
  • 1.6 max specific gravity

Motor Features include:

  • 230W input - 110W output
  • 60 Hz
  • 115 Volts
  • Single phase
  • 8000 to 14000 RPM
  • 300 cP maximum viscosity
  • CSA certified
Category
Drum Pumps
Full Load Ampere Rating
2.0 FLA
Maximum Flow Rate (gpm)_
12V 14 gpm / Electric 17 gpm / Air 15 gpm
Maximum Feet of Head
13' 12V / 20' Electric / 17' Air
Maximum Media Operating Temperature
0 °F to 150 °F
Maximum Viscosity
300 cP
Manufacturer
Finish Thompson
Motor Hertz
60 Hz
Motor Model
S1
Motor Phase
Single Phase
Type of Motor
ODP IP24
Motor Voltage
115 Volt
O-Ring Material
FKM
Outlet Size
3/4"
Type of Outlet
Discharge
RPM
8000 - 14000 RPM
Series
Series EF
Shaft Material
316 Stainless Steel
Secific Gravity
1.6 Maximum
Tube Length
40"
Tube Material
Polypropylene
Tubing Size
1.25"
Type of product
Drum Pump/Motor Kits
Wattage
230W Input / 110W Output
Quantity: 
QuoteRequest Information
This Finish Thompson kit is intended for mild acids, chemicals and corrosives. This kit comes with (1) EFP-40 pump, (1) S1 motor, (1) 3/4" x 8' EPDM discharge hose, (1) set clamps, (1) sealed bung adapter, (1) stainless steel nozzle and (1) 3/4" stainless steel swivel. The EFP-40 pump, (part number DEFP003) is 40" in length with a 1.25" polypropylene tube, FKM o-ring and a 316 stainless steel shaft. The S1 motor, (part number 107324-1) has an input of 230W and an output of 110W, 60 Hz, 115 Volts, 8000 to 14000 RPM, a maximum viscosity of 330 cP and is CSA certified.