Signet 2850 Conductivity/Resistivity Sensor Electronics Digital (S3 L) output, EasyCal 2839 Electrode, 0.01 cell

The Signet 2850 Conductivity/Resistivity Sensor Electronics are available in various configurations for maximum installation flexibility. The universal mount version is for pipe, wall, or tank mounting and enables single or dual (digital versions only) inputs using any standard Signet conductivity / resistivity sensor. The threaded j-box version can be used with these same Signet sensors for submersible sensor mounting. It is also available as a combined integral system configuration for in-line mounting and includes a conductivity electrode in a choice of 0.01, 0.1, 1.0, or 10.0 cm-1 cell constants. The 2850 is ideal for applications with a conductivity range of 0.055 to 200,000 ?S or a resistivity range of 18.2 M? to 10 k?. All 2850 units are available with a choice of two outputs: digital (S3 L) or 4 to 20 mA. The digital (S3 L) output version allows for up to six sensor inputs directly into the Signet 8900 Multi- Parameter Controller. The two-wire 4 to 20 mA output is available with eight 4 to 20 mA output ranges for each electrode cell constant. Additionally, each range can be inverted and are field selectable by the user. All 2850 units are built with NEMA 4X/IP 65 enclosures which allow wiring connections with long cable runs of up to 1,000 feet (305 m). EasyCal is a standard feature that automatically recognizes conductivity test solution values for simple field calibration. A calibration tool is available for validation of the sensor electronics according to USP requirements.
Typical applications:

• Water Treatment & Water Quality Monitoring
• Reverse Osmosis
• Deionization
• Demineralizer, Regeneration & Rinse
• Scrubber, Cooling tower and Boiler Protection
• Aquatic Animal Life Support Systems