Model TI.33 Industrial Grade Bimetal Thermometer, 3" Dial, 1/2" Connection, 2-1/2" Stem, Center Back Mount, 0/250 °F, ± 1.0% Full Scale Value Accuracy

Wika model 611.10 capsule gauges are extremely sensitive and highly accurate and are designed to measure very low pressure. They are especially well suited for systems where air or other gases are the measured media, as well as other applications requiring exceptional sensitivity, precision and reliability. Model 611.10 comes in 2" or 2-1/2" with copper alloy process connection in 1/4" MNPT with NBR seal. The dial is constructed of white aluminum with black lettering and the pointer is black aluminum. The case is black steel and the window is snap-in acrylic. Ingress protection - NEMA 2 (IP 32 per EN 60529 / IEC 529)

Wika Model's 232.54 & 233.54 all steel construction ensures longservice life in the harshest, most demanding environments. Model's232.54 & 233.54 come in 2-1/2" & 4" dials that are constructed ofwhite aluminum with black lettering; 2-1/2" size comes with stop pin.The case is constructed of 304 stainless steel with vent plug andpolished stainless steel bayonet ring and is suitable for liquidfilling. The window is laminated safety glass with a Buna-N Gasketand the pointer is constructed of black aluminum and is frictionadjustable. Series 232.54 & 233.54 are weather tight (Nema 4X / IP65). The pressure connection is 316L stainless steel and the wettedmaterial is 300 series stainless steel.

General applicationsinclude:

• Intended for adverse service conditions wherepulsating or vibration exists
• Process industry:chemical/petrochemical, power stations, mining, on and offshore,environmental technology, mechanical engineering and plantconstruction
• Suitable for gaseous or liquid media that willnot obstruct the pressure system

Wika model's 232.34 & 233.34 are designed specifically for the petrochemical and processing industries. These durable gauges are engineered to provide reliable service in harsh and rugged environments. They come in 4-1/2" and 6" sizes - either dry or liquid filled. The case is black fiberglass-reinforced thermoplastic (POCAN) with a solid front, blowout back and turret-style case with built in rear flange lugs. The dial is white aluminum with black lettering, stop pin at 6 0'clock. Standard WIKA psi single scales (4-1/2" only) with large figures at beginning and end for quick and easy identification. Model 232.34 & 233.34 are weather resistant (NEMA 3 / IP54) without membrane and weather tight (NEMA 4X / IP65) with dry case or filled case with membrane installed. These gauges are offered in lower mount or lower back mount in either 1/4" or 1/2" NPT with M4 internal tap. The restrictor is stainless steel, 0.6mm, standard. The window is clear acrylic with Buna-N gasket and the pointer is black aluminum and adjustable.

General applications include:

• Suitable for corrosive environments and gaseous or liquid media that will not obstruct the pressure system
• For applications with high dynamic pressure pulsations or vibrations
• Process industry: chemical/petrochemical, power stations, mining, on and offshore, environmental technology, mechanical engineering and plant construction

Wika's model 232.53 & 233.53 are ideal choices for corrosive environments and gas or liquid media that will not obstruct the pressure system. Model's 232.53 & 233.53 are weather tight (NEMA 4X/IP 65) and come dry (232.53) or glycerin filled (233.53). The case is constructed of 304 stainless steel with vent plug and stainless steel crimp ring. The window is polycarbonate and the pointer is black aluminum. The dial is white aluminum with black lettering and the wetted parts are stainless steel. Model's 232.53 & 233.53 are available in 2", 2-1/2" & 4" dial sizes.

General applications include:

• Liquid filled case for applications with high dynamic pressure pulsations or vibration
• Corrosive environments and gaseous or liquid media that will not obstruct the pressure system
• Process industry: chemical/petrochemical, power stations, mining, on & offshore, environmental technology, mechanical engineering and plant construction

Wika model's 232.34 & 233.34 are designed specifically for the petrochemical and processing industries. These durable gauges are engineered to provide reliable service in harsh and rugged environments. They come in 4-1/2" and 6" sizes - either dry or liquid filled. The case is black fiberglass-reinforced thermoplastic (POCAN) with a solid front, blowout back and turret-style case with built in rear flange lugs. The dial is white aluminum with black lettering, stop pin at 6 0'clock. Standard WIKA psi single scales (4-1/2" only) with large figures at beginning and end for quick and easy identification. Model 232.34 & 233.34 are weather resistant (NEMA 3 / IP54) without membrane and weather tight (NEMA 4X / IP65) with dry case or filled case with membrane installed. These gauges are offered in lower mount or lower back mount in either 1/4" or 1/2" NPT with M4 internal tap. The restrictor is stainless steel, 0.6mm, standard. The window is clear acrylic with Buna-N gasket and the pointer is black aluminum and adjustable.

General applications include:

• Suitable for corrosive environments and gaseous or liquid media that will not obstruct the pressure system
• For applications with high dynamic pressure pulsations or vibrations
• Process industry: chemical/petrochemical, power stations, mining, on and offshore, environmental technology, mechanical engineering and plant construction

Wika's model 212.53 & 213.53 gauges are ideal choices for OEM and general industrial applications requiring an economical dry or liquid filled gauge. Series 212.53 & 213.53 are weather tight (NEMA 4X/IP 66) and come dry (212.53) or liquid filled (213.53). The case is constructed of 304 stainless steel with vent plug and stainless steel crimp ring. The case connection is sealed with EPDM O-ring (Dry or glycerin fill) or Viton® o-ring (Silicone, halocarbon or fluorolube fill). The window is polycarbonate with Buna-N gasket and the pointer is black aluminum. The dial is white ABS (2" & 2-1/2") and white aluminum (4").

General applications include:

• Adverse service conditions where pulsation or vibration exists (with liquid filling)
• Hydraulics and compressors
• Suitable for gaseous or liquid media that will not obstruct the pressure system

Wika's model 111.25CT contractor pressure gauge is well suited for static applications. The large 4-1/2" dial face provides ease of reading from a distance. The case is constructed of stainless steel and has a matte finish. The dial is white aluminum with black lettering and stop pin. The pointer is black aluminum, the wetted parts are copper alloy and the window is snap-in polycarbonate. All model 111.25CT's come lower mount with 1/4" NPT connections.

General applications include:

• HVAC & plumbing contractors
• Suitable for all media that will not obstruct the pressure system or attack copper alloy parts

Wika Model TI.901 industrial glass thermometers offer easy-to-read temperature measurement in tough applications. Their molded housings offer excellent rigidity and impact resistance. The glass tube is also shock resistant. Model TI.901 features a 9" scale, swivel nut connection and completely adjustable locking case & stem. The scale is permanently baked-on with bold black graduations printed on white aluminum.

General applications include:

• Process piping
• HVAC/R
• Plumbing
• Water treatment
• Boilers
• Diesel engines
• Compressors

Wika's model 111.12 general purpose bourdon tube gauges are designedfor applications where the measured media does not corrode copperalloy. The 1-1/2", 2" & 2-1/2" come in a white plastic dial with stoppin and a black ABS pointer. The 3-1/2" comes in a white aluminumdial with stop pin, black aluminum pointer and u-clamp. The 4"comes in a white aluminum dial with stop pin and a black aluminumpointer. The window is crystal-clear plastic, snap-fit on sizes1-1/2", 2", 2-1/2" & 4". The window for the 3-1/2" iscrystal-clear plastic and threaded. The wetted parts are copperalloy.

General applications include:

• Hydraulicand pneumatic systems
• Pumps, compressors, water systems andregulators
• Suitable for fluid medium which does not clogconnection port or corrode copper alloy