Finish Thompson Air Motor for Drum Pump, 400W Output, 300 to 9,000 RPM, (Series TB) 220 cP (Series PF) 330 cP (Series TB & TT) 1500 cP Maximum Viscosity, 80 - 100 psi @ 15 - 32 cfm Air Requirements, CE certified

Finish Thompson PF series is a high performance drum/barrel pump designed for the container-to-container transfer of acids, corrosives and chemicals. It's unique double suction impeller provides for high flow and high head. Series PF is offered with multiple options and connections and is available with polypropylene, PVDF or 316 stainless steel tubes.

PF series pumps are for use in the following applications:

• Acids and bases
• Solvents
• Water treatment chemicals
• Cleaners
• Plating solutions
• Kidney dialysis solutions
• DEF/AdBlue (diesel exhaust fluid)

Finish Thompson PF series is a high performance drum/barrel pump designed for the container-to-container transfer of acids, corrosives and chemicals. It's unique double suction impeller provides for high flow and high head. Series PF is offered with multiple options and connections and is available with polypropylene, PVDF or 316 stainless steel tubes.

PF series pumps are for use in the following applications:

• Acids and bases
• Solvents
• Water treatment chemicals
• Cleaners
• Plating solutions
• Kidney dialysis solutions
• DEF/AdBlue (diesel exhaust fluid)

Finish Thompson TB series pumps are ideal for use with solvents, chemicals or low to medium viscosity mild corrosives. This sealed, lightweight and economical drum pump is constructed of either 316 stainless steel outer tube with 316 stainless steel and PTFE internals or pure polypropylene outer tube with pure PVDF/Alloy 625/PTFE internals. Series TB offers up to 200 cP maximum viscosity with either electric or air motors, a maximum specific gravity of 1.4 and tube lengths from 27" to 48".

TB series pumps are for use in the following applications:

• Acids and bases
• Solvents
• Water treatment chemicals
• Bleach
• Swimming pool chemicals
• Cleaners

Finish Thompson TB series pumps are ideal for use with solvents, chemicals or low to medium viscosity mild corrosives. This sealed, lightweight and economical drum pump is constructed of either 316 stainless steel outer tube with 316 stainless steel and PTFE internals or pure polypropylene outer tube with pure PVDF/Alloy 625/PTFE internals. Series TB offers up to 200 cP maximum viscosity with either electric or air motors, a maximum specific gravity of 1.4 and tube lengths from 27" to 48".

TB series pumps are for use in the following applications:

• Acids and bases
• Solvents
• Water treatment chemicals
• Bleach
• Swimming pool chemicals
• Cleaners

Finish Thompson TT series mid-performance drum pumps are ideal for liquids containing small particulate or solvents. Series TT pumps offer light to medium viscosity fluid handling and are available with either a 316 stainless steel or CPVC tube in a variety of lengths and discharge types.

TT series pumps are for use in the following applications:

• Inks and paints
• Solvents
• Sodium hypochlorite
• Food and beverage
• Pharmaceutical

This Finish Thompson kit is intended for corrosive fluids such as caustics, acids and salts. This kit comes with (1) PFP-48 pump, (1) M6 motor and (1) 5' reinforced PVC hose and clamp. The PFP-48 pump, (part number DPFP007) is 48" in length with a 2.00" polypropylene tube, FKM o-ring and an Alloy 625 shaft. The M6 air motor, (part number A100007) has an output of 400W, 300 to 9000 RPM, a maximum viscosity of 330 cP and is CE certified.

This Finish Thompson kit is intended for flammables, solvents, mild corrosives and organic acids. This kit comes with (1) PFS-40 pump, (1) M3V motor and (1) 5' reinforced PVC hose and clamp. The PFS-40 pump, (part number DPFS006) is 40" in length with a 2.00" 316 stainless steel tube, FKM o-ring and a 316 stainless steel shaft. The M3V air motor, (part number 106655) has an input of 650W and an output of 400W, 50/60 Hz, 115 volts, single phase, 5.6 FLA, 3500 to 10000 RPM, a maximum viscosity of 500 cP and is CSA certified.

This Finish Thompson kit is intended for non or mildly corrosive fluids. This kit comes with (1) PFM-48 pump, (1) M3V motor, (1) 3/4" x 8' EPDM discharge hose, (1) set clamps, (1) sealed bung adapter, (1) stainless steel nozzle and (1) 3/4" stainless steel swivel. The PFM-48 pump, (part number DPFM003) is 48" in length with a 2.00" polypropylene tube, FKM o-ring and a 316 stainless steel shaft. The M3V motor, (part number 106655) has an input of 650W and an output of 400W, 50/60 Hz, 115 volts, single phase, 5.6 FLA, 3500 to 10000 RPM, a maximum viscosity of 500 cP and is CSA certified.

This Finish Thompson kit is intended for non or mildly corrosive fluids. This kit comes with (1) PFM-40 pump, (1) M6 motor, (1) 3/4" x 8' EPDM discharge hose, (1) set clamps, (1) sealed bung adapter, (1) stainless steel nozzle and (1) 3/4" stainless steel swivel. The PFM-40 pump, (part number DPFM002) is 40" in length with a 2.00" polypropylene tube, FKM o-ring and a 316 stainless steel shaft. The M6 air motor, (part number A100007) has an output of 400W, 300 to 9000 RPM, a maximum viscosity of 330 cP and is CE certified.

This Finish Thompson kit is intended for flammable fluids such as acetone, MEK, lacquer, thinner and paint solvents. This kit comes with (1) TTS-40 pump, (1) M6X motor and (1) static protection kit with a 1" MNPT fitting. The TTS-40 pump, (part number DTTS008) is 40" in length with a 1-1/2" 316 stainless steel tube and shaft. The M7X motor, (part number A101135) is a single phase motor with an input of 500W and and output of 180W, 50/60 Hz, 115 Volts, 4.3 FLA, 2850/3450 RPM, a maximum viscosity of 400 cP and is CSA certified.