Weld-On® C-65™ Cleaner, Low VOC, Removes Oil, Grease and Dirt from PVC, CPVC, ABS and Styrene, Clear, Quart

Weld-On® PC-64™ is a purple or clear, low VOC emission, non-bodied, solvent primer-conditioner. Specifically designed to prepare PVC and CPVC plastic pipe and fitting surfaces for bonding with solvent cement. Removes grease, oil and dirt from the bonding surfaces of PVC and CPVC pipe and fittings. Penetrates and softens the pipe and fitting surfaces in preparation for solvent cement application.

Weld-On® PC-64™ Purple is available in 1/4 pint, 1/2 pint, pint, quart and gallon metal cans. Weld-On® PC-64™ Clear is available in quart metal cans only. Meets SCAQMD Rule 1168/316A and is LEED Compliant. Shelf life of three years in a tightly sealed container.

Schedule 40 PVC corrosion resistant pressure pipe, IPS sizes 1/8-24, is ideal for use in applications with temperatures up to and including 140 degrees F. Pressure rating (120 psi to 230 psi) varies with pipe size and temperature. It is generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens. Chemical resistance data is available and should be referenced for proper material. Schedule 40 PVC pipe exhibits excellent physical properties and flammability characteristics. Typical applications include: chemical processing, plating, high-purity applications, potable water systems, water and wastewater treatment, irrigation and agriculture along with many other industrial applications involving corrosive fluid transfer. Schedule 40 pipe is not recommended for threading or grooving. If threading is required for the application, solvent-cemented male or female adapters should be utilized. If grooving is required, solvent-cemented grooved adapters are available in limited sizes.Do not test or use PVC piping for air or compressed gasses. Care should be taken to avoid ketones, chlorinated hydrocarbon, and aromatic solvents.

Chlorinated polyvinyl chloride (CPVC) is created by subjecting PVC resin to a post chlorination reaction that results in additional chlorine atoms on the base molecule. This results in a thermoplastic material similar to PVC with added advantages: a higher heat distortion temperature and improved fire performance properties at relatively low cost compared to alternative materials. As with PVC, the physical properties of CPVC can be altered considerably to provide desirable properties by compounding techniques. CPVC provides an economic solution for piping utilized in process piping, hot water, and similar service applications where operating conditions exceed the recommended temperature limits of PVC.

Weld-On® 845™ manual dispensing gun comes in three options. Part # 14151 is for use with 400 mL cartridges and is a plastic frame. Part # 14152 is for use with 400 mL cartridges and is a metal frame. Part # 12471 is for use with 43 mL cartridges and is a plastic frame. For use with 845™ two-component, high strength, highly viscous, low VOC reactive adhesive.

Weld-On® 811™ Mixing Tips for use with 470 mL Cartridges