EH, PVDF/FKM, Flow Curve #4, 3 Ph - 5.0 HP Motor, 2 x 1-1/2 NPT

Item #P-45-0745
  • Flows up to 185gpm or 145ft TDH @ 60 Hz
  • Non-metallic solution contact - PPP, CPVC, PVDF, ECTFE
  • Runs Dry - no bearings, bushings, spindles or liners to replace
  • Centrifugal - quiet, vibration-freeIN or OUT of-tank installation
  • Choice of 12" or 18" Column
  • Shaft vapor seals protects motor bearings and atmosphere
  • Chemical duty motor (1.0 - 7.5 HP)
  • NPT or BSP connections
    The Series 'EH' Sump Pump Features a cantilevered, sleeved SS shaft with vapor seal between the rotating shaft and the support column to further protect the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry without damage. A compound impeller prevents liquid from rising in the column, even at maximum TDH, while the fully-enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of all Series 'EH' pumps is their ability to lift solution with an optional suction extension pipe installed. With the motor energized, the pump will self-prime when liquid is at impeller level. The solution level will then be pumped down to the end of the suction extension to a maximum depth of 9ft (2.7m). The pump will lose prime, then automatically re-prime when liquid again reaches the impelller.

    Category
    Pumps
    Connection Size
    2" x 1-1/2"
    Connection Type
    NPT
    Elastomer Material
    FKM
    Material
    PVDF
    Manufacturer
    SERFILCO
    Motor Horsepower
    5.0 hp
    Motor Phase
    3ph
    RPM
    3450 RPM
    Series
    EH
    Call for Availability

    Related Products

    SERFILCO
    Call for Availability
    SERFILCO
    Call for Availability
    SERFILCO
    Call for Availability
    SERFILCO
    Call for Availability
    SERFILCO
    Call for Availability
    SERFILCO
    Call for Availability