You Searched For "Snyder"

Snyder's chemical feed stations allow for the handling of small amounts of liquids and other chemicals in a safer and more efficient manner than drums. The chemical feed stations can be located close to your customer's use point, thereby eliminating the need for them to move and handle heavy drums and tote bins of hazardous materials, while at the same time eliminating the handling costs and inconvenient disposal of drums and one-way tote bins.

The ready-to-use chemical feed stations are lightweight, easy to handle and complete with secondary containment. Added features such as molded pump shelves, polyethylene tank stands, custom fitting and accessory packages help to individualize any customer's needs. The chemical feed stations are available with primary tanks constructed of either FDA, ANSI/NSF61 compliant high density linear polyethylene or high density crosslink polyethylene. Stands and containment basins are constructed of high density linear polyethylene.

Long lasting, corrosion resistant tank systems provide maximum options for batch mixing, storage, dispensing and material handling. 100% HDLPE Material Construction complies with FDA Regulation 177.1520 and National Sanitation Foundation (NSF) 61 standards.

Snyder Commercial Horizontal tanks are constructed of high-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant and are UV stabilized for long-term outdoor service. Specific gravity choices are 1.5 and 1.9. Tanks ordered with code "137" or "126" will be supplied with no hole cuts or fittings. Outlets are PP or PE with EPDM gaskets.

Snyder Horizontal Tanks are ideal tanks for storing and hauling water and other liquids. Snyder horizontal tanks are to be used above ground as free standing tanks. Hoop assemblies are required and included on 730 gallon and larger tanks. Note: Only one hoop is supplied and tanks are only available in HDLPE in Natural Color.

Snyder Horizontal tanks are available in the following materials:

• High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
• Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
• Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in horizontal tanks up to 525 gallons
• Sulfuric acid resin #880046. Available in horizontal tanks up to 525 gallons

All materials are UV stabilized for long-term outdoor service.

Snyder Commercial Vertical tanks are constructed of high-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant and are UV stabilized for long-term outdoor service. Specific gravity choices are 1.5 and 1.9. Tanks ordered with code "137" or "126" will be supplied with no hole cuts or fittings. Outlets are PP or PE with EPDM gaskets.

Snyder Commercial Vertical tanks are constructed of high-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant and are UV stabilized for long-term outdoor service. Specific gravity choices are 1.5 and 1.9. Tanks ordered with code "137" or "126" will be supplied with no hole cuts or fittings. Outlets are PP or PE with EPDM gaskets.

Snyder vertical tanks are available in both Industrial (ASTM D1998-15) and Commercial designs and are offered in a wide variety of material options for a diverse range of applications. Specific gravity choices are 1.35, 1.5 and 1.9. Snyder vertical tanks are available with IBC 2015-CBC 2016 seismic and 150 mph wind restraint tie-down systems. An integrally molded-in bottom drain fitting, provides maximum drainage for vertical bulk tanks in the 2,000 to 12,500 gallon size and is available as an option in diameter sizes up to 6" depending on tank size.

Snyder Vertical tanks are available in the following materials:

• High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
• Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
• Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
• Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons

All materials are UV stabilized for long-term outdoor service.

Snyder vertical tanks are available in both Industrial (ASTM D1998-15) and Commercial designs and are offered in a wide variety of material options for a diverse range of applications. Specific gravity choices are 1.35, 1.5 and 1.9. Snyder vertical tanks are available with IBC 2015-CBC 2016 seismic and 150 mph wind restraint tie-down systems. An integrally molded-in bottom drain fitting, provides maximum drainage for vertical bulk tanks in the 2,000 to 12,500 gallon size and is available as an option in diameter sizes up to 6" depending on tank size.

Snyder Vertical tanks are available in the following materials:

• High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
• Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
• Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
• Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons

All materials are UV stabilized for long-term outdoor service.

Snyder vertical tanks are available in both Industrial (ASTM D1998-15) and Commercial designs and are offered in a wide variety of material options for a diverse range of applications. Specific gravity choices are 1.35, 1.5 and 1.9. Snyder vertical tanks are available with IBC 2015-CBC 2016 seismic and 150 mph wind restraint tie-down systems. An integrally molded-in bottom drain fitting, provides maximum drainage for vertical bulk tanks in the 2,000 to 12,500 gallon size and is available as an option in diameter sizes up to 6" depending on tank size.

Snyder Vertical tanks are available in the following materials:

• High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
• Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
• Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
• Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons

All materials are UV stabilized for long-term outdoor service.

Snyder vertical tanks are available in both Industrial (ASTM D1998-15) and Commercial designs and are offered in a wide variety of material options for a diverse range of applications. Specific gravity choices are 1.35, 1.5 and 1.9. Snyder vertical tanks are available with IBC 2015-CBC 2016 seismic and 150 mph wind restraint tie-down systems. An integrally molded-in bottom drain fitting, provides maximum drainage for vertical bulk tanks in the 2,000 to 12,500 gallon size and is available as an option in diameter sizes up to 6" depending on tank size.

Snyder Vertical tanks are available in the following materials:

• High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
• Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
• Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
• Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons

All materials are UV stabilized for long-term outdoor service.

Snyder Commercial Horizontal tanks are constructed of high-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant and are UV stabilized for long-term outdoor service. Specific gravity choices are 1.5 and 1.9. Tanks ordered with code "137" or "126" will be supplied with no hole cuts or fittings. Outlets are PP or PE with EPDM gaskets.

Snyder Horizontal Tanks are ideal tanks for storing and hauling water and other liquids. Snyder horizontal tanks are to be used above ground as free standing tanks. Hoop assemblies are required and included on 730 gallon and larger tanks. Note: Only one hoop is supplied and tanks are only available in HDLPE in Natural Color.

Snyder Horizontal tanks are available in the following materials:

• High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
• Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
• Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in horizontal tanks up to 525 gallons
• Sulfuric acid resin #880046. Available in horizontal tanks up to 525 gallons

All materials are UV stabilized for long-term outdoor service.

Snyder Commercial Horizontal tanks are constructed of high-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant and are UV stabilized for long-term outdoor service. Specific gravity choices are 1.5 and 1.9. Tanks ordered with code "137" or "126" will be supplied with no hole cuts or fittings. Outlets are PP or PE with EPDM gaskets.

Snyder's chemical injection tanks are offered in a variety of tank sizes and materials to ensure the ideal tank for every application. Horizontal tanks are available in 65, 125, 225 and 335 gallon capacities and are constructed of HDPE, XLPE or heavy duty 12 gauge stainless steel. Containment basins provide 110% containment of the tank and are enclosed to keep out debris and prevent wildlife or livestock from getting into the containment making the basin an eco-friendly/rancher friendly system. Containment basins have a pump mount and a 2" and 3" female threaded connection for items such as solar panels. The corrosion resistant polyethylene stands won't rust.

Chemical injection tanks are ideal for the following applications:

• Foamers
• Hydrate Inhibitors
• Paraffin Inhibitors
• Defoamers & Antifoams
• Water Clarifiers
• Scale Control Chemicals
• Specialty Chemicals
• Corrosion Inhibitors & Scavenger Products
• Surfactants, Cleaning & Wetting Products

Snyder's chemical injection tanks are offered in a variety of tank sizes and materials to ensure the ideal tank for every application. Horizontal tanks are available in 65, 125, 225 and 335 gallon capacities and are constructed of HDPE, XLPE or heavy duty 12 gauge stainless steel. Containment basins provide 110% containment of the tank and are enclosed to keep out debris and prevent wildlife or livestock from getting into the containment making the basin an eco-friendly/rancher friendly system. Containment basins have a pump mount and a 2" and 3" female threaded connection for items such as solar panels. The corrosion resistant polyethylene stands won't rust.

Chemical injection tanks are ideal for the following applications:

• Foamers
• Hydrate Inhibitors
• Paraffin Inhibitors
• Defoamers & Antifoams
• Water Clarifiers
• Scale Control Chemicals
• Specialty Chemicals
• Corrosion Inhibitors & Scavenger Products
• Surfactants, Cleaning & Wetting Products