You Searched For "avco"
Filter Products
Item # and Description
Manufacturer
Price
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
There are two models of AVCO gate valves to choose from; the AVCO 1116 Series and 1226 Series. The AVCO 1116 Series is available with 150# ANSI flanged ends, a metal seat and bolted bonnet. The AVCO 1226 Series comes with NPT ends, a screwed bonnet and a non-rising stem and is rated to 200 psi. Both valves are stocked in 316 stainless steel (CF8M). The 1116 Series is available upon request in a variety of alloys including Duplex 2205, Super Duplex 2507, Hastelloy C and AL6XN among others. The flanged gate valves are available from ½ through 10 and the threaded end gate valves are available from ½ through 2. These AVCO gate valves are an economical choice for use in oil & gas, steam, food processing or chemical applications.
The AVCO 100 series ball valve is an economy 1-piece ball valve in cast 316 stainless steel (CF8M) with NPT ends that meet ASME B1.20.1. It is a reduced port valve that provides reliable performance at the lowest price points. The 100 Series is available in sizes ¼ through 2 and up to 1000 WOG pressure and temperatures up to 400°F. The valves come standard with a locking lever handle to prevent unwarranted use. A blow-out proof stem is standard. The valves come with 15% glass filled TFE seats and TFE seals to provide consistent performance in a wide range of applications including the chemical, hydraulic, food processing, water, oil and gas industries.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.
The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.