You Searched For "georg"

Georg Fischer's type 578 butterfly valve offers a lug style body, with double eccentric valve principal, a variety of wetted materials, and a comprehensive actuation package. This versatile plastic valve is offered in PVC, CPVC, ABS, PP and PVDF bodies with EPDM and FPM seals standard (other seals available upon request). Sizes range from 2" to 12" with a pressure rating of up to 150 psi.

The 578 valve has an off-center disc and shaft that disengages the disc from the body during operation. Since the disc is not in contact with the disc seal when opening and closing, there is significantly less wear on the valve parts. Another result of the double-eccentric design is reduced torque.

The type 578 butterfly valve is ideal for the following applications:

• Commercial Aquariums
• Water Parks / Swimming Pools
• Semiconductor
• Chemical Processing
• Laboratories
• Water Treatment
• Food and Beverage
• Mining
• Cooling / Heating HVAC
• Land Fills

Georg Fischer's type 578 butterfly valve offers a lug style body, with double eccentric valve principal, a variety of wetted materials, and a comprehensive actuation package. This versatile plastic valve is offered in PVC, CPVC, ABS, PP and PVDF bodies with EPDM and FPM seals standard (other seals available upon request). Sizes range from 2" to 12" with a pressure rating of up to 150 psi.

The 578 valve has an off-center disc and shaft that disengages the disc from the body during operation. Since the disc is not in contact with the disc seal when opening and closing, there is significantly less wear on the valve parts. Another result of the double-eccentric design is reduced torque.

The type 578 butterfly valve is ideal for the following applications:

• Commercial Aquariums
• Water Parks / Swimming Pools
• Semiconductor
• Chemical Processing
• Laboratories
• Water Treatment
• Food and Beverage
• Mining
• Cooling / Heating HVAC
• Land Fills

Georg Fischer's type 578 butterfly valve offers a lug style body, with double eccentric valve principal, a variety of wetted materials, and a comprehensive actuation package. This versatile plastic valve is offered in PVC, CPVC, ABS, PP and PVDF bodies with EPDM and FPM seals standard (other seals available upon request). Sizes range from 2" to 12" with a pressure rating of up to 150 psi.

The 578 valve has an off-center disc and shaft that disengages the disc from the body during operation. Since the disc is not in contact with the disc seal when opening and closing, there is significantly less wear on the valve parts. Another result of the double-eccentric design is reduced torque.

The type 578 butterfly valve is ideal for the following applications:

• Commercial Aquariums
• Water Parks / Swimming Pools
• Semiconductor
• Chemical Processing
• Laboratories
• Water Treatment
• Food and Beverage
• Mining
• Cooling / Heating HVAC
• Land Fills

Georg Fischer's type 578 butterfly valve offers a lug style body, with double eccentric valve principal, a variety of wetted materials, and a comprehensive actuation package. This versatile plastic valve is offered in PVC, CPVC, ABS, PP and PVDF bodies with EPDM and FPM seals standard (other seals available upon request). Sizes range from 2" to 12" with a pressure rating of up to 150 psi.

The 578 valve has an off-center disc and shaft that disengages the disc from the body during operation. Since the disc is not in contact with the disc seal when opening and closing, there is significantly less wear on the valve parts. Another result of the double-eccentric design is reduced torque.

The type 578 butterfly valve is ideal for the following applications:

• Commercial Aquariums
• Water Parks / Swimming Pools
• Semiconductor
• Chemical Processing
• Laboratories
• Water Treatment
• Food and Beverage
• Mining
• Cooling / Heating HVAC
• Land Fills

Georg Fischer's type 578 butterfly valve offers a lug style body, with double eccentric valve principal, a variety of wetted materials, and a comprehensive actuation package. This versatile plastic valve is offered in PVC, CPVC, ABS, PP and PVDF bodies with EPDM and FPM seals standard (other seals available upon request). Sizes range from 2" to 12" with a pressure rating of up to 150 psi.

The 578 valve has an off-center disc and shaft that disengages the disc from the body during operation. Since the disc is not in contact with the disc seal when opening and closing, there is significantly less wear on the valve parts. Another result of the double-eccentric design is reduced torque.

The type 578 butterfly valve is ideal for the following applications:

• Commercial Aquariums
• Water Parks / Swimming Pools
• Semiconductor
• Chemical Processing
• Laboratories
• Water Treatment
• Food and Beverage
• Mining
• Cooling / Heating HVAC
• Land Fills

Georg Fischer's type 578 butterfly valve offers a lug style body, with double eccentric valve principal, a variety of wetted materials, and a comprehensive actuation package. This versatile plastic valve is offered in PVC, CPVC, ABS, PP and PVDF bodies with EPDM and FPM seals standard (other seals available upon request). Sizes range from 2" to 12" with a pressure rating of up to 150 psi.

The 578 valve has an off-center disc and shaft that disengages the disc from the body during operation. Since the disc is not in contact with the disc seal when opening and closing, there is significantly less wear on the valve parts. Another result of the double-eccentric design is reduced torque.

The type 578 butterfly valve is ideal for the following applications:

• Commercial Aquariums
• Water Parks / Swimming Pools
• Semiconductor
• Chemical Processing
• Laboratories
• Water Treatment
• Food and Beverage
• Mining
• Cooling / Heating HVAC
• Land Fills

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer Type 582 pressure reducing valve body is fully molded, providing several performance benefits. Machining bodies can create sharp corners at high stress points that can lead to stress cracking. The flow characteristcs between two like machined bodies can differ significantly because of small dimensional inconsistences and true union connections often require additional fusions which increases the number of leak paths in a given valve. The type 582 eliminates all of these issues to provide consistent performance with a variety of end connection options.

Type 582 pressure reducing valves are available in 3/8" to 2" sizes in PVC, CPVC, PP and PVDF materials. The Bonnet is glass-filled PP, the Diaphragm is PTFE/EPDM and the seals are EPDM, FPM or PTFE. Type 582 is mounted using stainless steel threaded inserts. The set pressure range is 7 - 130 psi.

Type 582 pressure reducing valves are ideal for the following applications:

• Water Treatment
• Chemical Process
• Microelectronics

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.

The Georg Fischer type 586 pressure retaining valve maintains a predetermined pressure value upstream of the valve, essential when equipment such as spray nozzles require a minimum amount of pressure to operate properly. The valve does not have exterior bolts that require re-torqueing and has a fully molded body which eliminates inconsistencies found with machined bodies.

Type 586 is available in 1/2" through 2" sizes with PVC, CPVC, PP or PVDF bodies. 3/8" is available in PVC only. Diaphragms are PTFE/EPDM with a 304 stainless steel diaphragm plate and seals are either EPDM or FPM. Optional gauges and gauge guards are available upon request.