Handhelds
Filter Products
Item # and Description
Manufacturer
Price
The HI3812 is a titration-based chemical test kit that determines the total hardness concentration in two ranges: 0.0 to 30.0 mg/L and 0 to 300 mg/L. The HI3812 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents for perform approximately 100 tests.
Complete setup
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
Complete setup
- All required materials are included with the test kit, such as the sample beaker, plastic pipette, and reagent dropper bottles.
- Readings from 0.0 to 30.0 mg/L are determined to 0.3 mg/L resolution.
- Readings from 0 to 300 mg/L are determined to 3 mg/L resolution.
- There is no need to buy a new kit when reagents are exhausted. The HI3812-100 can be ordered to replace the reagents supplied with the kit.
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
HI70004P is a quality pH 4 calibration buffer produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers. Reported values are accurate to +/- 0.01 pH @ 25°C and are traceable to NIST Standard Reference Materials (SRMs).
Convenience of individual packaging
Convenience of individual packaging
- Ideal for users that do not calibrate frequently
- Ideal for field use due to portability
- Every pH buffer sachet is as fresh as the day it was packaged
- Light block packaging prevents oxidation from UV light that could alter the buffer value
- Hanna pH buffers are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet.
- Easy to identify different buffer values
- Solution does not contain any dyes that may stain the reference cell of a pH electrode
HI70007P is a set of premium quality pH 7 buffer sachets produced in accordance with ISO 3696/BS3978 standards using high purity salts, deionized water, certified weight-checked balances, and Class A glassware in a temperature controlled environment monitored with certified thermometers. Reported values are accurate to +/- 0.01 pH @ 25°C and are traceable to NIST Standard Reference Materials (SRMs).
Convenience of individual packaging
Convenience of individual packaging
- Ideal for users that do not calibrate frequently
- Ideal for field use due to portability
- Every sachet is as fresh as the day it was packaged
- Light block packaging prevents oxidation from UV light that could alter the buffer value
- Hanna pH analysis calibration solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened sachet.
- Easy to identify different buffer values
- Solution does not contain any dyes that may stain the reference cell of a pH electrode
Our pH Technical Buffer Solutions are dedicated to measurements that require extremely accurate pH monitoring, and come with a certificate of analysis prepared by comparison against NIST standards. Our pH Technical Buffer Solutions are dedicated to measurements that require extremely accurate pH monitoring, and come with a certificate of analysis prepared by comparison against NIST standards.
Air tight bottle with tamper-proof seal
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
- Hanna buffers are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
- Easy to identify different buffer values
- Solution does not contain any dyes that may stain the reference cell of a pH electrode
Our pH Technical Buffer Solutions are dedicated to measurements that require extremely accurate pH monitoring, and come with a certificate of analysis prepared by comparison against NIST standards. Our pH Technical Buffer Solutions are dedicated to measurements that require extremely accurate pH monitoring, and come with a certificate of analysis prepared by comparison against NIST standards.
Air tight bottle with tamper-proof seal
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
- Hanna pH buffers are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
- Easy to identify different buffer values
- Solution does not contain any dyes that may stain the reference cell of a pH electrode
HI7007M is a premium quality pH 7.01 calibration solution that is NIST traceable and supplied with a Certificate of Analysis. Hanna calibration buffers have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hannas line of calibration buffers have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
Air tight bottle with tamper-proof seal
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
- Hanna buffers are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
- Easy to identify different buffer values
- Solution does not contain any dyes that may stain the reference cell of a pH electrode
The HI701 Checker®HC (Handheld Colorimeter) is a simple, accurate and cost effective way to measure free chlorine. Free chlorine is the active form of chlorine used for disinfection of drinking water, swimming pools and spas, and vegetable rinse water. Free chlorine in water is also harmful to a reverse osmosis membrane and needs to be monitored for removal from source water prior to being used. Designed as a more accurate alternative to chemical test kits, the HI701 free chlorine meter provides quick, accurate results in a few easy steps.
Features at-a-glance:
Features at-a-glance:
- For use with freshwater samples
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Water Quality, Environmental, Education, Pools and Spas
HI70300L is a specially formulated electrode storage solution that can be used to store your pH electrode*. To ensure the best response time, the sensor tip and the reference junction of the pH electrode should be kept moist when not in use. Placing the pH electrode in a small glass filled with storage solution or replacing the solution in the protective cap is an easy way to store the electrode. The HI70300L should also be used to rehydrate the electrode after cleaning by soaking for at least one hour before taking measurements.
Air tight bottle with a tamper-proof seal
Air tight bottle with a tamper-proof seal
- Ensures quality and freshness of solution
- Hanna pH storage solutions are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
HI7031L is a premium quality 1,413 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. Hanna conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution. Hanna's line of conductivity standards have been specially formulated to have an expiration of 5 years from the date of manufacture for an unopened bottle.
H7031L is a premium quality 1,413 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978. Additional equipment used in preparation of the solutions include certified weight-checked balances, Class A glassware and certified thermometers.
Air tight bottle with tamper-proof seal
H7031L is a premium quality 1,413 µS/cm conductivity solution standardized with a conductivity meter that has been calibrated with potassium chloride NIST 2202 SRM (Standard Reference Material) in deionized water for analytical use in accordance with ISO 3696/BS3978. Additional equipment used in preparation of the solutions include certified weight-checked balances, Class A glassware and certified thermometers.
Air tight bottle with tamper-proof seal
- Ensures quality and freshness of solution
- Hanna buffers are specially formulated to have an expiration of 5 years from manufacture for an unopened bottle.
The HI711 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure total chlorine. Chlorine is a popular disinfectant used in municipal water, fruits and vegetables, as well as equipment in the food and beverage industry. Though beneficial in destroying pathogens, levels greater than 4 parts per million (ppm) is harmful to humans and therefore, must be monitored. Designed as a more accurate alternative to chemical test kits, the HI711 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Features at-a-glance:
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Water Quality, Education, Pool and Spa
The HI718 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure iodine. Introduced as an alternative to chlorine, iodine as a sanitizer decreases eye irritation in pools and saps and provides a more stable level of disinfection in adverse conditions. However, due to its toxic and corrosive properties, iodine is strictly monitored. Designed as a more accurate alternative to chemical test kits, the HI718 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Features at-a-glance:
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Water Quality, Education, Industrial, Agriculture, Pool and Spa
The HI721 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost-effective way to measure iron. Naturally present in water in low concentrations, iron may affect the taste of water, as well as stain both laundry and household appliances. Also an indicator of corrosion, iron is monitored in industrial plants and water cooling and heating systems. Designed as a more accurate alternative to chemical test kits, the HI721 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Features at-a-glance:
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Water Quality, Education, Industrial, Municipal Water, Aquarium
The HI755-26 are the replacement reagents for the Marine Alkalinity Checker® HC - HI755. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
The HI755-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Marine Alkalinity Checker® HC. These reagents follow the Colorimetric Method in which the reaction causes a distinctive range of colors from yellow to green to blue to develop. By simply adding the solution of HI755-26 to the sample, the reaction will take place and the Marine Alkalinity Checkers will determine the concentration from the color that is produced. The results will be displayed in ppm of CaCO3 . These reagents are designed to be used with samples that have an expected range of 0 to 300 ppm CaCO3 .
The HI755-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Marine Alkalinity Checker® HC. These reagents follow the Colorimetric Method in which the reaction causes a distinctive range of colors from yellow to green to blue to develop. By simply adding the solution of HI755-26 to the sample, the reaction will take place and the Marine Alkalinity Checkers will determine the concentration from the color that is produced. The results will be displayed in ppm of CaCO3 . These reagents are designed to be used with samples that have an expected range of 0 to 300 ppm CaCO3 .
The HI770 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost-effective way to measure silica. Silica is found in all natural surface and saline waters in the dissolved form. Due to the potential to cause scaling, it is undesirable and therefore monitored in industrial applications, and heating and reverse osmosis systems. Designed as a more accurate alternative to chemical test kits, the HI770 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Features at-a-glance:
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Water Quality, Environmental, Industrial, Aquariums
The HI772 Checker®HC (Handheld Colorimeter) provides a simple, accurate, and cost-effective way to measure alkalinity in degrees of carbonate hardness, commonly abbreviated as dKH. Critical to marine environments, alkalinity not only provides the carbonate ion required for calcium carbonate skeletal regeneration of coral reefs, but it also acts as a pH buffer against large changes in acidity. Designed as a more accurate alternative to chemical test kits, the HI772 provides quick, accurate results in a few easy steps.
Features at-a-glance:
Features at-a-glance:
- Easier to use and more accurate than chemical test kits
- Dedicated to a single parameter
- Small size, big convenience
- Ideal for: Aquaculture & Aquariums, Water Quality
Designed to bring simplicity to pH testing during the any process, the HI98103 Checker® pH Tester is designed for direct measurement. A replaceable electrode extends the life of your tester.
Better Features for Better Testing
An onscreen stability indicator ensures the highest level of confidence in your results. The selectable auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Pocket Sized
The compact size makes the HI98103 Checker® pH tester ideal for on-the-go testing. A large LCD display provides at-a-glance readings from any angle and single button operation streamlines the testing process for any user.
Long Battery Life
The included CR2032 Li-ion battery provides up to 1000 hours of continuous use. The battery icon will blink to let you know it is time to change the battery so you never miss a measurement.
Your measurements require detailed attention; so should your electrode. The HI98103 features a replaceable electrode that is ideal for general pH measurements.
Tapered Electrode Design
The supplied HI1271 pH electrode is 103 mm long and tapers to an 8 mm diameter at the sensing end to easily fit into test tubes, vials, and other containers with a small opening.
Plastic Body
The plastic body is significantly reduces necessary maintenance.
No-hassle Replacement
Dont let a broken electrode stop you from testing. Simply unscrew the old electrode, and screw on a new one.
We believe that buying a tester should be simple. Your HI98103 Checker® pH tester is equipped with everything you need for successful testing right out of the box.
Electrode Cleaning Solution
Your Tester comes with cleaning solution that has been engineered to keep your electrode free from build up. This concentrated combination of detergents cleans your tester quickly and effectively so that your tester stays in optimum condition.
pH 4 & 7 Buffer Sachets
When performing a pH calibration it is important that the correct buffers are used. We include some start buffers to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate.
Storage Solution
Proper storage of your electrode will ensure reliable measurements and a long electrode life. Our storage solution is specially formulated to keep the pH glass hydrated while minimizing organic growth.
Better Features for Better Testing
An onscreen stability indicator ensures the highest level of confidence in your results. The selectable auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Pocket Sized
The compact size makes the HI98103 Checker® pH tester ideal for on-the-go testing. A large LCD display provides at-a-glance readings from any angle and single button operation streamlines the testing process for any user.
Long Battery Life
The included CR2032 Li-ion battery provides up to 1000 hours of continuous use. The battery icon will blink to let you know it is time to change the battery so you never miss a measurement.
Your measurements require detailed attention; so should your electrode. The HI98103 features a replaceable electrode that is ideal for general pH measurements.
Tapered Electrode Design
The supplied HI1271 pH electrode is 103 mm long and tapers to an 8 mm diameter at the sensing end to easily fit into test tubes, vials, and other containers with a small opening.
Plastic Body
The plastic body is significantly reduces necessary maintenance.
No-hassle Replacement
Dont let a broken electrode stop you from testing. Simply unscrew the old electrode, and screw on a new one.
We believe that buying a tester should be simple. Your HI98103 Checker® pH tester is equipped with everything you need for successful testing right out of the box.
Electrode Cleaning Solution
Your Tester comes with cleaning solution that has been engineered to keep your electrode free from build up. This concentrated combination of detergents cleans your tester quickly and effectively so that your tester stays in optimum condition.
pH 4 & 7 Buffer Sachets
When performing a pH calibration it is important that the correct buffers are used. We include some start buffers to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate.
Storage Solution
Proper storage of your electrode will ensure reliable measurements and a long electrode life. Our storage solution is specially formulated to keep the pH glass hydrated while minimizing organic growth.
The HI98120 is a waterproof ORP and temperature handheld meter. The housing of this tester is completely sealed to protect against the intrusion of water and is also designed to float if accidentally dropped into a body of water. The HI73120 replaceable ORP electrode is a cartridge design with the stainless steel round connector. With this type of design there are no pins that can bend or break during replacement. The ORP electrode also hase has an extendable cloth junction. This type of junction allows for the renewal of the junction by simply pulling out 3 mm (1/8") to clear any clogging which improves measurement response time and stability. The exposed stainless steel temperature probe on this meter facilitates a faster, accurate temperature measurement.
Similar to a pH measurement that quantifies the how acidic or alkaline solutions are, ORP (Oxidation Reduction Potential) measurements quantify the overall state of a solution as having the ability to oxidize or reduce a chemical species. Oxidizing and reducing reagents are used to participate in chemical reactions known as a redox reaction.
An important part of the ORP probe is to have a sensor that is chemically inert; meaning it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold. Both are commonly used in the construction of ORP probes.
The platinum sensor is often preferred because it is mechanically simpler to produce. Platinum can be welded to glass and also has a similiar thermal expansion coefficient. Sensors made of gold cannot be welded to the glass and are often placed in plastic supports applied to the glass or plastic tube by means of tiny elastomeric bungs.
Many industries rely upon ORP measurements including swimming pools, food processing, boilers and cooling towers, and plating. The measurement of ORP helps the user monitor the effectiveness of disinfecting compounds including chlorine and ozone. ORP is also used to monitor redox reactions including the use of bisulfite in the reduction of hexavalent chromium to trivalent chromium in plating wastewater.
Features at-a-glance:
Waterproof
Similar to a pH measurement that quantifies the how acidic or alkaline solutions are, ORP (Oxidation Reduction Potential) measurements quantify the overall state of a solution as having the ability to oxidize or reduce a chemical species. Oxidizing and reducing reagents are used to participate in chemical reactions known as a redox reaction.
An important part of the ORP probe is to have a sensor that is chemically inert; meaning it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold. Both are commonly used in the construction of ORP probes.
The platinum sensor is often preferred because it is mechanically simpler to produce. Platinum can be welded to glass and also has a similiar thermal expansion coefficient. Sensors made of gold cannot be welded to the glass and are often placed in plastic supports applied to the glass or plastic tube by means of tiny elastomeric bungs.
Many industries rely upon ORP measurements including swimming pools, food processing, boilers and cooling towers, and plating. The measurement of ORP helps the user monitor the effectiveness of disinfecting compounds including chlorine and ozone. ORP is also used to monitor redox reactions including the use of bisulfite in the reduction of hexavalent chromium to trivalent chromium in plating wastewater.
Features at-a-glance:
Waterproof
- IP67 rated
- Protects the internal electronics of the meter from an ingress of water in the event that the meter is dropped into a tank or a body of water.
- HI98120 features a stability indicator tag on the LCD that will disappear once the reading stabilizes.
- An electrode last approximately one to two years. It is possible to replace just the electrode and not have to buy a completely new meter.
- The HI73120 ORP electrode is a simple cartridge design allows the sensor to be easily replaced whether in the lab or in the field.
- Allows the reading to be frozen so that the reading can be documented.
- The meter automatically turns itself off after 8 minutes of use in order to conserve battery life in the event the meter is accidently left on.
- When the meter is turned on the battery % level is displayed as a percentage.
The HI98121 is a reliable, waterproof tester that ensures quick and easy measurements of both pH and ORP. This accurate pH and ORP tester features 0.01 pH resolution with automatic two-point calibration and temperature compensation in a single, portable, pocket device. No more switching between meters for your routine measurements.
The HI98121 is a lightweight ergonomically designed tester. This pH and ORP tester is designed to float making it ideal for taking ORP measurements virtually anywhere. With the HI98121 it is possible to monitor both pH and ORP at the same time. The HI98121 is commonly used to monitor pH and chlorine for many applications including swimming, food sanitization, plating wastewater treatment, and cooling tower water treatment.
By definition pH is the measurement of the voltage generated by an electrochemical cell at zero current. The potential generated is proportional to the thermodynamic activity of the ion being measured.
Similar to a pH measurement that quantifies the how acidic or alkaline solutions are, ORP (Oxidation Potential) measurements quantify the overall state of a solution as having the ability to oxidize or reduce a chemical species. Oxidizing and reducing reagents are used to participate in chemical reactions known as a redox reaction.
An ORP meter must be chemically inert; it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold are both used in the construction of ORP sensors.
Features at-a-glance:
The HI98121 is a lightweight ergonomically designed tester. This pH and ORP tester is designed to float making it ideal for taking ORP measurements virtually anywhere. With the HI98121 it is possible to monitor both pH and ORP at the same time. The HI98121 is commonly used to monitor pH and chlorine for many applications including swimming, food sanitization, plating wastewater treatment, and cooling tower water treatment.
By definition pH is the measurement of the voltage generated by an electrochemical cell at zero current. The potential generated is proportional to the thermodynamic activity of the ion being measured.
Similar to a pH measurement that quantifies the how acidic or alkaline solutions are, ORP (Oxidation Potential) measurements quantify the overall state of a solution as having the ability to oxidize or reduce a chemical species. Oxidizing and reducing reagents are used to participate in chemical reactions known as a redox reaction.
An ORP meter must be chemically inert; it cannot be oxidized or reduced itself. It must also have the proper surface characteristics to promote rapid electron exchange, a property known as high exchange current density. Two noble metals have proven to work well for this purpose: pure platinum and pure gold are both used in the construction of ORP sensors.
Features at-a-glance:
- Waterproof
- Automatic Temperature Compensation
- HOLD feature
- Simple to use
- Economical
The HI98128 pHep®5 is an advanced, waterproof pH and temperature tester with 0.01 Resolution that makes measuring quick and easy. This accurate pH tester features 0.01 resolution with automatic two-point calibration and temperature compensation in a single, portable, pocket device. No more switching between meters for your routine measurements.
The pHep®5 is a water pH tester with a 0.01 pH resolution and an accuracy of ±0.05 pH. It has many advanced features that are found in more expensive portable instrumentation. One or two-point calibration is automatic to two selectable buffer sets (4.01, 7.01 and 10.01 or 4.01, 6.86, and 9.18). The pHep®5 also features a replaceable electrode with a stainless steel round connector. This cartridge design has no pins to line up or that can break. The HI73127 replacement pH electrode also features an extractable cloth junction. The extractable cloth junction of the HI73127 allows for the renewing of the junction. Simply extract 1/8" of the junction by pulling on the junction will expose a new portion. Any clogging that was present will be cleared and the response time will be back to normal extending the life of the pH electrode.
Features at-a-glance:
Waterproof
The pHep®5 is a water pH tester with a 0.01 pH resolution and an accuracy of ±0.05 pH. It has many advanced features that are found in more expensive portable instrumentation. One or two-point calibration is automatic to two selectable buffer sets (4.01, 7.01 and 10.01 or 4.01, 6.86, and 9.18). The pHep®5 also features a replaceable electrode with a stainless steel round connector. This cartridge design has no pins to line up or that can break. The HI73127 replacement pH electrode also features an extractable cloth junction. The extractable cloth junction of the HI73127 allows for the renewing of the junction. Simply extract 1/8" of the junction by pulling on the junction will expose a new portion. Any clogging that was present will be cleared and the response time will be back to normal extending the life of the pH electrode.
Features at-a-glance:
Waterproof
- Designed to float if accidentally dropped in a tank
- pH range is from -2.00 to 16.00 pH
- All readings are compensated for variations in temperature
- Temperature displayed in °C or °F along with pH reading
- pH tester displays a clock tag that will disappear when the reading has achieved stability
- Freezes reading on the display to allow recording of measurement
- Meter will automatically shut off if there is not enough power to get an accurate measurement
- Meter automatically shuts off after 8 minutes of non-use to maximize battery life
The low range Combo® pH, EC, TDS (ppm) and temperature meter is one of Hanna's most popular meters. The waterproof design, simple operation, and replaceable electrode mean that you can rely on this meter for years.
The HI98129 is an easy-to-use and accurate waterproof pH, conductivity, TDS (ppm) tester. It measures pH, EC in the low range (0 to 3999 μS/cm), TDS (0 to 2000 ppm), and temperature. This floating, waterproof combination pocket tester has an easy to read, LCD and an automatic shut-off. All pH, EC, and TDS (ppm) readings are automatically temperature compensated (ATC) to prevent temperature-related variations in your measurements. For EC and TDS (ppm) readings, the EC/TDS conversion factor (CONV) is selectable by the user, as well as the temperature compensation coefficient β (BETA).
Replaceable pH Electrode Cartridge
The HI98129 tester features an easy to replace pH electrode cartridge with an extendable cloth junction. The extendable cloth junction helps increase electrode life and the replaceable pH cartridge means that this tester does not need to be thrown away when the pH sensor is exhausted. Also, the sturdy, snap-in connector means there are no pins to bend or break!
High Accuracy EC and TDS (ppm) Tester Probe
The graphite conductivity probe provides greater accuracy because it cannot be contaminated by salt deposits in the solution. The exposed temperature sensor provides fast response times and guarantees highly accurate temperature compensated readings.
Features at-a-glance:
3 sensors in a single tester
Low Battery Indicator
The HI98129 is an easy-to-use and accurate waterproof pH, conductivity, TDS (ppm) tester. It measures pH, EC in the low range (0 to 3999 μS/cm), TDS (0 to 2000 ppm), and temperature. This floating, waterproof combination pocket tester has an easy to read, LCD and an automatic shut-off. All pH, EC, and TDS (ppm) readings are automatically temperature compensated (ATC) to prevent temperature-related variations in your measurements. For EC and TDS (ppm) readings, the EC/TDS conversion factor (CONV) is selectable by the user, as well as the temperature compensation coefficient β (BETA).
Replaceable pH Electrode Cartridge
The HI98129 tester features an easy to replace pH electrode cartridge with an extendable cloth junction. The extendable cloth junction helps increase electrode life and the replaceable pH cartridge means that this tester does not need to be thrown away when the pH sensor is exhausted. Also, the sturdy, snap-in connector means there are no pins to bend or break!
High Accuracy EC and TDS (ppm) Tester Probe
The graphite conductivity probe provides greater accuracy because it cannot be contaminated by salt deposits in the solution. The exposed temperature sensor provides fast response times and guarantees highly accurate temperature compensated readings.
Features at-a-glance:
3 sensors in a single tester
- pH electrode with extractable junction
- Amperometric EC/TDS sensor
- Exposed temperature probe for faster EC and TDS (ppm) readings
- Designed to float if accidentally dropped in sample
- pH range is from 0.00 to 14.00 pH
- Choice of either a 0.45 or 1.0 conversion factor
- All readings are compensated for variations in temperature
- Temperature displayed in °C or °F along with pH, EC or TDS reading
- Meter displays a clock tag that will disappear when the reading has achieved stability
- Freezes reading on the display to allow recording of measurement
- Meter will automatically shut off if there is not enough power to get an accurate measurement
Low Battery Indicator
- When the level is below 5%, the battery symbol on the LCD blinks to indicate a low battery condition.
- Auto-off feature automatically shuts off meter after 8 minutes of non-use to maximize battery life
The HI98308 Pure Water tester is a rugged and reliable pocket-sized tester that offers quick and accurate readings. The HI98308 Pure Water tester features graphite electrodes to reduce polarization effects and an exposed temperature probe for fast response when compensating for temperature changes. Manual calibration is performed to a single point.
The HI98308 features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC is based on Ohm's Law, I = V/R, where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface, which will affect accuracy. The non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results. When calibration is needed, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
The HI98308 uses a conductometric measurement to determine the purity of water. The HI98308 Pure Water Test (PWT) enables users to check the purity of distilled or demineralized water in laboratory or industrial environments. PWT is suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. This tester is housed in durable casing that provides excellent protection against harsh industrial environments.
Electrolytic conductivity, abbreviated as EC, is a measurement made in which electrical charges on atomic or larger sized particles in a medium are moved under the influence of a potential difference. EC is a measure of concentration, however, it is non-specific for ion type. An ion is a charged particle present in the solution that contributes to the current flow. Ions are formed when a salt such as sodium chloride is dissolved in water to form particles having electrical charges. Sodium chloride, separates into Na+ and Cl-. This is a simplified definition as the measurement is affected by many things such as the type of ionic compound(s) dissolved in the water; the ions mobility, the solution viscosity, temperature as well as concentration.
Electrical conductance, the ability of a substance to conduct an electrical current is the reciprocal of electrical resistance. "Conductance" and "Resistance" depend on the geometrical dimensions of the substance being measured. Conductivity and resistivity are "normalized" terms that are used to denote a bulk intrinsic property of a substance. This is the measurement a standardized EC probe on a Conductivity or resistivity meter provides. Conductivity measurements can be used to provide additional industry specific measurements; TDS, Salinity and USP compliant conductivity. Many of Hanna's meters provide these measurements also.
Features at-a-glance:
One-point calibration
The HI98308 features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC is based on Ohm's Law, I = V/R, where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface, which will affect accuracy. The non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results. When calibration is needed, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.
The HI98308 uses a conductometric measurement to determine the purity of water. The HI98308 Pure Water Test (PWT) enables users to check the purity of distilled or demineralized water in laboratory or industrial environments. PWT is suited for fields such as printed circuit board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. This tester is housed in durable casing that provides excellent protection against harsh industrial environments.
Electrolytic conductivity, abbreviated as EC, is a measurement made in which electrical charges on atomic or larger sized particles in a medium are moved under the influence of a potential difference. EC is a measure of concentration, however, it is non-specific for ion type. An ion is a charged particle present in the solution that contributes to the current flow. Ions are formed when a salt such as sodium chloride is dissolved in water to form particles having electrical charges. Sodium chloride, separates into Na+ and Cl-. This is a simplified definition as the measurement is affected by many things such as the type of ionic compound(s) dissolved in the water; the ions mobility, the solution viscosity, temperature as well as concentration.
Electrical conductance, the ability of a substance to conduct an electrical current is the reciprocal of electrical resistance. "Conductance" and "Resistance" depend on the geometrical dimensions of the substance being measured. Conductivity and resistivity are "normalized" terms that are used to denote a bulk intrinsic property of a substance. This is the measurement a standardized EC probe on a Conductivity or resistivity meter provides. Conductivity measurements can be used to provide additional industry specific measurements; TDS, Salinity and USP compliant conductivity. Many of Hanna's meters provide these measurements also.
Features at-a-glance:
One-point calibration
- Calibrate with 84 μS/cm EC solution using a screwdriver
- Fast response to changes in sample temperature
- Samples automatically compensated for temperature variations
- Reduced polarization effects
The HI98311 is an advanced, waterproof conductivity and TDS (ppm) tester for quick and easy measurements while on the go. This lightweight, waterproof conductivity tester offers accurate conductivity (0 to 3999 μS/cm), TDS (0 to 2000 ppm), and temperature measurements in a single, portable, pocket device. No more switching between meters for your routine measurements.
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST®s ease of use, in combination with its affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST® 5.
This conductivity tester includes features such as a replaceable graphite electrode, adjustable TDS ratio, °C or °F measurement, Automatic Temperature Compensation (ATC) with adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration.
The graphite conductivity electrode offers greater accuracy by resisting contamination by salt deposits in the sample. All of these features are packed in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC, TDS, and temperature measurements.
Features at-a-glance:
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST®s ease of use, in combination with its affordability, made it the standard in EC and TDS measurement. Hanna continues the standard in EC and TDS testing with the DiST® 5.
This conductivity tester includes features such as a replaceable graphite electrode, adjustable TDS ratio, °C or °F measurement, Automatic Temperature Compensation (ATC) with adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration.
The graphite conductivity electrode offers greater accuracy by resisting contamination by salt deposits in the sample. All of these features are packed in a floating, waterproof casing. This 3-in-1 tester is unmatched in EC, TDS, and temperature measurements.
Features at-a-glance:
- Waterproof and designed to float
- Automatic Temperature Compensation
- HOLD button to freeze readings on the display
- BEPS Alerts the user of low battery power that could adversely affect readings
Designed to bring simplicity to salinity testing during the any process, the HI98319 Marine Salinity Tester measures conductivity (EC) to determine the salinity of natural and artificial seawater. Within seconds, the salinity and temperature are digitally displayed on the LCD.
Better Features for Better Testing
An onscreen stability indicator ensures the highest level of confidence in your results. The selectable auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Pocket Sized
The compact size makes the HI98319 Marine Salinity Tester ideal for on-the-go testing. The multilevel LCD display provides at-a-glance salinity and temperature readings from any angle while dual button operation streamlines the testing process for any user.
Long Battery Life
The included CR2032 Li-ion battery provides up to 100 hours of continuous use. The battery icon will blink to let you know it is time to change the battery so you never miss a measurement.
Graphite Sensors
Unlike stainless steel sensors, graphite sensors reduces polarization effects and does not oxidize for more reliable and accurate readings.
Durable Casing
Designed to withstand the knocks, drops, and spills of real life, the waterproof body ensures top performance in any environment. These meters are totally protected against dust and water intrusion from any direction.
Integrated Temperature Probe
Conductivity measurements are very sensitive to temperature variations. HI98319 has an exposed temperature sensor to ensure fast, accurately compensated readings even during sudden temperature fluctuations.
We believe that buying a tester should be simple. Your HI98319 Marine Salinity Tester is equipped with everything you need for successful testing right out of the box.
35.00 ppt Calibration Standard Sachet Solution (4)
When performing a calibration it is important that the correct buffers are used. We include some starter buffer to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate.
Protective Case
Your tester comes with a complimentary carrying case to keep your tester safe from potential drops or bumps when not in use.
Better Features for Better Testing
An onscreen stability indicator ensures the highest level of confidence in your results. The selectable auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on.
Pocket Sized
The compact size makes the HI98319 Marine Salinity Tester ideal for on-the-go testing. The multilevel LCD display provides at-a-glance salinity and temperature readings from any angle while dual button operation streamlines the testing process for any user.
Long Battery Life
The included CR2032 Li-ion battery provides up to 100 hours of continuous use. The battery icon will blink to let you know it is time to change the battery so you never miss a measurement.
Graphite Sensors
Unlike stainless steel sensors, graphite sensors reduces polarization effects and does not oxidize for more reliable and accurate readings.
Durable Casing
Designed to withstand the knocks, drops, and spills of real life, the waterproof body ensures top performance in any environment. These meters are totally protected against dust and water intrusion from any direction.
Integrated Temperature Probe
Conductivity measurements are very sensitive to temperature variations. HI98319 has an exposed temperature sensor to ensure fast, accurately compensated readings even during sudden temperature fluctuations.
We believe that buying a tester should be simple. Your HI98319 Marine Salinity Tester is equipped with everything you need for successful testing right out of the box.
35.00 ppt Calibration Standard Sachet Solution (4)
When performing a calibration it is important that the correct buffers are used. We include some starter buffer to get you going. The single-use sachets are individually sealed so you use fresh buffer each time you calibrate.
Protective Case
Your tester comes with a complimentary carrying case to keep your tester safe from potential drops or bumps when not in use.
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3') flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
The Checktemp® 1 Digital Thermometer - HI98509 is a high-accuracy thermometer with a 1 m (3.3') flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
Thermistors make it possible to obtain extremely high accuracy in a very short period of time. The Hanna CAL Check feature has been incorporated into the Checktemp®1 for reliable and accurate measurements. CAL Check™ automatically runs a self-check upon startup and reports status back to the user; "-0-" for ok and "Err" if something is wrong.
Checktemp®1 makes routine controls fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations, making it an ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
The Checktemp® 1 Digital Thermometer - HI98509 is a high-accuracy thermometer with a 1 m (3.3') flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
Thermistors make it possible to obtain extremely high accuracy in a very short period of time. The Hanna CAL Check feature has been incorporated into the Checktemp®1 for reliable and accurate measurements. CAL Check™ automatically runs a self-check upon startup and reports status back to the user; "-0-" for ok and "Err" if something is wrong.
Checktemp®1 makes routine controls fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations, making it an ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2°C (±0.5°F) - Accuracy
- Most accurate temperature tester in the world
- CAL Check™ - Automatically verifies calibration at startup
- Silicone probe cable - 3.3' silicone cable maintains flexibility and performance
- °C/°F Status User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible - Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- Auto-Off (select from 8 min., 60 min., or turn the feature off)