Vertical Pumps
Harrington's vertical pumps come in a range of impeller diameters, port sizes and column lengths. Browse our product range to request a quote, obtain additional information, and explore purchasing options.
Filter Products
Item # and Description
Manufacturer
Price
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EF' Vertical Pump represents the next generation of molded pumps from SERFILCO with flows to 400gpm at 60Hz. It is a robust design to meet the most demanding applications while providing the economy of operation found in all of our molded Pumps. The 'EF' features a cantilevered, sleeved, SS shaft with vapor seal to provide protection for the motor. The cantilevered shaft eliminates bearings and conventional pump seals, resulting in a pump that can run dry indefinitely without damage. This pump is offered in a choice of our exclusive high temperature polypropylene or CPVC construction and, as with all of our vertical cantilever pumps, provides non-metallic solution icontact. A compound impeller prevents liquid from rising in the column even at maximum TDH, while the fully enclosed bottom impeller provides high hydraulic efficiency at low horsepower. A unique characteristic of our vertical cantilever pumps is their ability to lift solution with an optional suction extension installed. The pump self-primes as long as liquid is at or above the level of the impeller. Once primed, the solution will then be pumped down to the end of the suction extension to a maximum depth of 9ft. (2.7m). The 1" thick mounting plate is polypropylene or PVC and includes a PTFE vapor seal. Standard O-Rings are EPDM. The compound design impeller is fully enclosed for maximum efficiency. The chemical duty, NEMA"C" Face motors are 208-230/460V/3/60 @ 3450 or 1725 RPM and 190-208/380-415V/3/50 @ 2850 or 1450 RPM. Motors are painted with two-part epoxy enamel. These pumps can be used with up to a 9ft (2.7m) suction extension under certain conditions.
The Series 'EO 3/4" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. All models feature a cantilevered, sleeved SS shaft which eliminates bearing or bushing resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble free service. A vapor seal between the rotating shaft and the support column protects the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower
The Series 'EO 3/4" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. All models feature a cantilevered, sleeved SS shaft which eliminates bearing or bushing resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble free service. A vapor seal between the rotating shaft and the support column protects the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower
The Series 'EO 3/4" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. All models feature a cantilevered, sleeved SS shaft which eliminates bearing or bushing resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble free service. A vapor seal between the rotating shaft and the support column protects the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower
The Series 'EO 1" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1" Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the semi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1-1/4' Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the smi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1-1/4' Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the smi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1-1/4' Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the smi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1-1/4' Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the smi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1-1/4' Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the smi-enclosed bottom impeller provides efficient flow performance at low horsepower.
The Series 'EO 1-1/4' Pump benefits from proven design features gained through over 30 years of experience in developing chemically resistant vertical pumps. The unique design of this pump includes a fully sleeved SS shaft threaded into a chemical duty motor. This eliminates weak shaft connections, pump bearings, spindles, bushing and liners, resulting in a chemical duty pump which can run dry indefinitely, providing years of trouble-free service. Standard models include a heavy duty machined mounting plate with PTFE vapor seal and column labyrinth seal to protect the motor. The compound impeller prevents liquid from rising in the column, even at maximum TDH, while the smi-enclosed bottom impeller provides efficient flow performance at low horsepower.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, series P pumps have an upper working temperature of 180/150/280°F, respectively, and thus can handle most corrosive, slurries, and abrasive solutions. Series P pumps are easy to install and operate. They have no seals or bushings, can run dry, and are virtually maintenance-free.