You Searched For "reed"

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

The King Instrument 7310 series flowmeter has an economical 304 stainless steel case with a molded polysulfone metering tube for lighter duty applications where a case enclosed meter is preferred. Series 7310 offers the following scale ranges; 0.5 to 100 GPM with Teflon® float (water), 1.5 to 160 GPM (water) with metal float and 6.1 to 33 SCFM (air). Accuracy is ± 3% of full scale flow, ± 5% of full scale flow for 120 & 150 GPM metal floats and ± 6% of full scale flow for Teflon® floats. Turndown is 10:1. Repeatability is typically 1/2% except for 120 & 150 GPM metal floats and Teflon® floats then repeatability is 1%. Series 7310 has a standard Viton® O-ring with optional Buna-N, EPR and Kalrez® offerings.

The King Instrument 7310 series flowmeter has an economical 304 stainless steel case with a molded polysulfone metering tube for lighter duty applications where a case enclosed meter is preferred. Series 7310 offers the following scale ranges; 0.5 to 100 GPM with Teflon® float (water), 1.5 to 160 GPM (water) with metal float and 6.1 to 33 SCFM (air). Accuracy is ± 3% of full scale flow, ± 5% of full scale flow for 120 & 150 GPM metal floats and ± 6% of full scale flow for Teflon® floats. Turndown is 10:1. Repeatability is typically 1/2% except for 120 & 150 GPM metal floats and Teflon® floats then repeatability is 1%. Series 7310 has a standard Viton® O-ring with optional Buna-N, EPR and Kalrez® offerings.

The King Instrument series 7470 flowmeter offers value and versatility with a 304 stainless steel case, vertical or horizontal NPT or flange connections and a 127 mm scale glass tube. Connection sizes available are 3/4" and 1-1/2" NPT or 1/2", 1" and 1-1/2" flange. Fitting materials offered are 316L stainless steel standard, PVC optional (vertical connections only). The internal components are 316L stainless steel standard with optional Hastelloy® C-276. The O-rings are Viton® standard with optional Buna-N, EPR and Kalrez® offerings. Series 7470 offers the following scale ranges; 0.25 to 116 GPM and 1.0 to 245 SCFM. Accuracy is ± 3% of full scale flow, turndown is 10:1 and repeatability is 0.5%. The case is 304 stainless steel with a polycarbonate shield and the metering tube is borosilicate kinglass.

The King Instrument series 7470 flowmeter offers value and versatility with a 304 stainless steel case, vertical or horizontal NPT or flange connections and a 127 mm scale glass tube. Connection sizes available are 3/4" and 1-1/2" NPT or 1/2", 1" and 1-1/2" flange. Fitting materials offered are 316L stainless steel standard, PVC optional (vertical connections only). The internal components are 316L stainless steel standard with optional Hastelloy® C-276. The O-rings are Viton® standard with optional Buna-N, EPR and Kalrez® offerings. Series 7470 offers the following scale ranges; 0.25 to 116 GPM and 1.0 to 245 SCFM. Accuracy is ± 3% of full scale flow, turndown is 10:1 and repeatability is 0.5%. The case is 304 stainless steel with a polycarbonate shield and the metering tube is borosilicate kinglass.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

All Reed cutter wheels are made from high shock-resistant tool steel, while competitive wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed wheels can be heat-treated for the perfect balance between hardness and toughness to make the wheels resist breakage and last longer.

The King Instrument 9000 Silver Series flowmeter features a powder-coated 304 stainless steel case and precision molded polycarbonate shield that will tolerate most corrosive applications. These flowmeters offer versatility with 35 flow ranges, 6 tube sizes and full horizontal and vertical connection options. Series 9000 offers the following scale ranges; 0.23 to 85 GPM and 1.15 to 285 SCFM. The metering tube is borosilicate kinglass. The internal components are 316L stainless steel standard with optional Hastelloy® C-276. The O-rings are Viton® standard with optional Buna-N, EPR and Kalrez®. Fittings are either Female NPT or flange. The fitting material is 316L stainless steel standard with optional PVDF (NPT only). Optional alarm available with latching Reed switch. Series 9000 conforms to ISA RP 16.6.