You Searched For "flowline"
Filter Products
Item # and Description
Manufacturer
Price
The general purpose ultrasonic level sensor provides continuous level detection up to 18.0' (5.5m) with 3 programmable relays for level switch or level control functions, and a 4-20mA signal output. The sensor is programmed via the integral push button display module. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications.
The general purpose ultrasonic level sensor provides continuous level detection up to 18.0' (5.5m) with 3 programmable relays for level switch or level control functions, and a 4-20mA signal output. The sensor is programmed via the integral push button display module. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications.
The general purpose ultrasonic level sensor provides continuous level detection up to 9.8' (3.0m) with 3 programmable relays for level switch or level control functions, and a 4-20mA signal output. The sensor is programmed via the integral push button display module. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications.
The general purpose ultrasonic level sensor provides continuous level detection up to 9.8' (3.0m) with 3 programmable relays for level switch or level control functions, and a 4-20mA signal output. The sensor is programmed via the integral push button display module. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications.
The general purpose ultrasonic level sensor provides continuous level detection up to 26.2 (8m) with 3 programmable relays for level switch or level control functions, and a 4-20mA signal output. The sensor is programmed via the integral push button display module. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications.
The general purpose ultrasonic level sensor provides continuous level detection up to 26.2 (8m) with 3 programmable relays for level switch or level control functions, and a 4-20mA signal output. The sensor is programmed via the integral push button display module. Each relay can be configured on a single set point alarm or latched on two set points for automatic fill or empty in simplex, duplex or triplex level control modes with selectable time delay and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for pump lift station, sump and day tank level applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 9.8 (3m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 9.8 (3m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 18.0 (5.5m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 18.0 (5.5m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 26.2' (8m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 26.2' (8m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 32.8 (10m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
Flowline's EchoSpan® general purpose ultrasonic transmitter provides continuous level measurement up to 32.8 (10m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications.
The general purpose buoyancy liquid level switch provides high or low liquid level detection of relatively clean water and chemical solutions with a 15VA reed switch output. Media examples include potable water and boric acid. The baffle body eliminates level switch chatter caused by turbulence. The submersible PP or PVDF level switch sensor is mounted vertically inside the tank, and connected to a PLC or relay controller.
The general purpose buoyancy liquid level switch provides high or low liquid level detection of relatively clean water and chemical solutions with a 15VA reed switch output. Media examples include potable water and boric acid. The baffle body eliminates level switch chatter caused by turbulence. The submersible PP or PVDF level switch sensor is mounted vertically inside the tank, and connected to a PLC or relay controller.
The general purpose mini-float level switch provides reliable liquid level detection of clean water and chemical solutions with a 15VA reed switch output. Media examples include water and sulfuric acid. The polypropylene or PVDF liquid level sensors are mounted vertically inside the tank as a high level alarm or low level alarm.
The general purpose mini-float level switch provides reliable liquid level detection of clean water and chemical solutions with a 15VA reed switch output. Media examples include water and sulfuric acid. The polypropylene or PVDF liquid level sensors are mounted vertically inside the tank as a high level alarm or low level alarm.
The general purpose mini-float level switch provides reliable liquid level detection of clean water and chemical solutions with a 15VA reed switch output. Media examples include water and sulfuric acid. The polypropylene or PVDF liquid level sensors are mounted vertically inside the tank as a high level alarm or low level alarm.
The general purpose mini-float level switch provides reliable liquid level detection of clean water and chemical solutions with a 15VA reed switch output. Media examples include water and sulfuric acid. The polypropylene or PVDF liquid level sensors are mounted vertically inside the tank as a high level alarm or low level alarm.
Offered in a vertical configuration, the general purpose high-temp float level switches provide reliable liquid level detection of relatively clean water, diluted chemicals and light weight oils with a 30VA reed switch output. Media examples include hot deionized water and cooking oil. The stainless steel liquid level sensors are mounted vertically inside the tank or horizontally through the tank wall as a high level alarm or low level alarm.
Offered in a vertical configuration, the general purpose high-temp float level switches provide reliable liquid level detection of relatively clean water, diluted chemicals and light weight oils with a 100VA reed switch output. Media examples include hot deionized water and cooking oil. The stainless steel liquid level sensors are mounted vertically inside the tank or horizontally through the tank wall as a high level alarm or low level alarm.
The general purpose sump float level switch provides reliable liquid level detection and is designed for the automation of pumps, filling or emptying of tanks, wells and reservoirs. The switch body is free of any irregularities and consists of a double airtight chamber with a high-pressure melted polypropylene seal for use in wastewater applications.
The general purpose sump float level switch provides reliable liquid level detection and is designed for the automation of pumps, filling or emptying of tanks, wells and reservoirs. The switch body is free of any irregularities and consists of a double airtight chamber with a high-pressure melted polypropylene seal for use in wastewater applications.
The general purpose sump float level switch provides reliable liquid level detection and is designed for the automation of pumps, filling or emptying of tanks, wells and reservoirs. The switch body is free of any irregularities and consists of a double airtight chamber with a high-pressure melted polypropylene seal for use in wastewater applications.