You Searched For "flowline"
Filter Products
Item # and Description
Manufacturer
Price
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2 to 1 1/2, and the long flow sensor is used in 2 and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
"Cricket Alphasonic level transmitter Polypropylene 96"" length 1"" National pipe thread Flowline"
"Cricket Alphasonic level transmitter PVDF 72"" length 1"" National pipe thread Flowline"
The safety barrier electrically isolates intrinsically safe two-wire level transmitters approved for hazardous applications from their electrical circuit, by limiting the energy allowed to pass into the hazardous area, and thus prohibiting the ignition of flammable atmospheres.
The general purpose compact junction box mounts directly on a level sensor or fitting assembly to provide convenient wiring and conduit termination. Offered in two sizes, select the LC05 for multi-point switch installations on Smart Trak, and the LC06 for single-point switch installations on Switch-Pak or an individual level sensor. A removable terminal strip with slot mounts is provided for termination.
The general purpose compact junction box mounts directly on a level sensor or fitting assembly to provide convenient wiring and conduit termination. Offered in two sizes, select the LC05 for multi-point switch installations on Smart Trak, and the LC06 for single-point switch installations on Switch-Pak or an individual level sensor. A removable terminal strip with slot mounts is provided for termination.
The general purpose compact junction box mounts directly on a level sensor or fitting assembly to provide convenient wiring and conduit termination. Offered in two sizes, select the LC05 for multi-point switch installations on Smart Trak, and the LC06 for single-point switch installations on Switch-Pak or an individual level sensor. A removable terminal strip with slot mounts is provided for termination.
The general purpose compact junction box mounts directly on a level sensor or fitting assembly to provide convenient wiring and conduit termination. Offered in two sizes, select the LC05 for multi-point switch installations on Smart Trak, and the LC06 for single-point switch installations on Switch-Pak or an individual level sensor. A removable terminal strip with slot mounts is provided for termination.
The general purpose level controller is offered in two configurations for pump and valve control. The LC10 accepts one level sensor input and provides one 16A relay for high level control or low level control. The optional flash alarm brings attention to level alarm conditions. Package this level controller with our liquid level switch sensors and fittings.
The general purpose level controller is offered in two configurations for pump and valve control. The LC10 accepts one level sensor input and provides one 16A relay for high level control or low level control. The optional flash alarm brings attention to level alarm conditions. Package this level controller with our liquid level switch sensors and fittings.
The general purpose level controller is offered in two configurations for pump and valve control. The LC11 accepts two level sensor inputs and provides one latching 16A relay for automatic fill or empty control. The optional flash alarm brings attention to level alarm conditions. Package this level controller with our liquid level switch sensors and fittings.
The general purpose level controller is offered in two configurations for pump and valve control. The LC11 accepts two level sensor inputs and provides one latching 16A relay for automatic fill or empty control. The optional flash alarm brings attention to level alarm conditions. Package this level controller with our liquid level switch sensors and fittings.
The general purpose flow controller is used for low-flow pump and process protection. The LC30 accepts one flow sensor input and provides one 10A relay for low flow control. Package this flow controller with our liquid or gas flow switch sensors.
The general purpose flow controller is used for low-flow pump and process protection. The LC30 accepts one flow sensor input and provides one 10A relay for low flow control. Package this flow controller with our liquid or gas flow switch sensors.
Available in CSA approved, general purpose (LC4X) or isolation (LC9X) with built-in intrinsic safety barriers for use with associated apparatus, the level controller is offered in three configurations for pump and valve control. The LC40/90 accepts one level sensor input and provides one 10A relay. The LC41 accepts two level sensor inputs and provides one latching 10A relay for automatic fill or empty control. The LC42/92 accepts three level sensor inputs with one latching 10A relay output for automatic fill or empty control, and a second non-latching 10A relay for high level alarm or low level alarm. For field mount installation, add a single or indicator NEMA box.
CSA approved, general purpose , the level controller is offered in three configurations for pump and valve control. The LC40 accepts one level sensor input and provides one 10A relay. The LC41 accepts two level sensor inputs and provides one latching 10A relay for automatic fill or empty control. The LC42 accepts three level sensor inputs with one latching 10A relay output for automatic fill or empty control, and a second non-latching 10A relay for high level alarm or low level alarm. The optional NEMA 4X polycarbonate enclosure is a great choice for field mount installations and comes complete with a DIN rail mounting kit.