You Searched For "avco"

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1500 series ball valve brings all the features and benefits of our 1100 series valve to the cryogenic market. Designed in accordance with ASME B16.34, it incorporates a single piece cryogenic bonnet extension bolted to the main valve body. The valve is available off the shelf or with customized bonnet lengths to give greater flexibility and ensure the operator is at a sufficient distance from the pipeline. The seal between the bonnet and valve is achieved with an engineered Flexitallic spiral wound gasket. The cryogenic bonnet houses an extended stem and, unlike most valve manufacturers, the valve is sealed twice – once at the top of the valve and again at the top of the bonnet. Sealing occurs at the thrust washers inside the body and bonnet to reduce the potential for leakage. The upper mount pad complies with ISO 5211 and provides positive travel stops and lock off. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Inter-changeability enables this valve to be supplied as a L-port cryogenic diverter valve with bottom or side entry ports or as a Vee ported cryogenic control valve. Ideally suited to the aerospace, petrochemical, liquid nitrogen (LNG) and liquid oxygen markets, this valve will meet all your requirements.

The AVCO 1700 series bottom entry diverter ball valve brings high quality and performance to the diverter and mixing valve market. Using a 90-degree diverter ball allows the valve to flow different media into a common port and is often used for flushing lines or as a common valve into a mixing tank. When installed with a V ported ball it offers metered mixing into a common line. The 180-degree ball option gives media swapping capabilities or media diversion. The stem is live loaded with blow out prevention and has online adjustment capability. Sealing occurs at the thrust washer inside the body to reduce the potential for leakage. The encapsulation of the seat also gives an option for fire safe trim that meets API 607. Locking levers give positive diversion or shut-off and the ISO 5211 mount pad allows for many actuators, limit switches and positioners to be mounted with ease. Available with all the same options as most of our entire 1000 series range, these valves offer flexibility in materials and end styles for use in many applications. This valve series is truly at home in the oil, gas, petroleum and food processing industries, meeting the highest standards such as ASME B16.34 & API 598.