You Searched For "ipex"

IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation. They offer a variety of advanced features such as the patented seat stop carrier, a high quality stem and ball support system, and the new DUAL BLOCK® system which locks the union nuts preventing back-off due to vibration or thermal cycling. Deep grooves, thick O-rings, and cushioned Teflon® seats contribute to strong seals at pressures up to 232psi while an integral mounting flange and support bracketing combine for simple adaptation for actuation and anchoring. Actuators can be configured for 90° or 180° operation. TKD Series 3-Way Automated Ball Valves are part of our complete systems of pipe, valves, and fittings, engineered and manufactured to our strict quality, performance, and dimensional standards.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation. They offer a variety of advanced features such as the patented seat stop carrier, a high quality stem and ball support system, and the new DUAL BLOCK® system which locks the union nuts preventing back-off due to vibration or thermal cycling. Deep grooves, thick O-rings, and cushioned Teflon® seats contribute to strong seals at pressures up to 232psi while an integral mounting flange and support bracketing combine for simple adaptation for actuation and anchoring. Actuators can be configured for 90° or 180° operation. TKD Series 3-Way Automated Ball Valves are part of our complete systems of pipe, valves, and fittings, engineered and manufactured to our strict quality, performance, and dimensional standards.

IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing, or on/off isolation. They offer a variety of advanced features such as the patented seat stop carrier, a high quality stem and ball support system, and the new DUAL BLOCK® system which locks the union nuts preventing back-off due to vibration or thermal cycling. Deep grooves, thick O-rings, and cushioned Teflon® seats contribute to strong seals at pressures up to 232psi while an integral mounting flange and support bracketing combine for simple adaptation for actuation and anchoring. Actuators can be configured for 90° or 180° operation. TKD Series 3-Way Automated Ball Valves are part of our complete systems of pipe, valves, and fittings, engineered and manufactured to our strict quality, performance, and dimensional standards.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

IPEX TKD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. They will replace a Tee + 2 valve linkage assembly at reduced cost and space, along with shorter installation and maintenance time. The patented seat stop carrier allows for in-line micro adjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes our patented DUAL BLOCK locking union nut system, which ensures the nuts are held in position even under severe service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning. TKD Series 3-Way Ball Valves are part of our complete Xirtec 140 systems of pipe, valves and fittings, engineered and manufactured to our strict quality, performance, and dimensional standards.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

The IPEX TKD series 3-way ball valves can be used for flow diverting, mixing, or on/off isolation. They are manufactured to replace Tee + 2 valve linkage assemblies at reduced cost and space allowing for shorter installation and maintenance times. The patented seat stop carrier allows for in-line microadjustment of the ball seating, and features o-ring cushioning to minimize wear and prevent seizing. The TKD also includes IPEX's patented DUAL BLOCK® locking union nut system, which ensures the nuts are held in position even under sever service conditions such as high vibration or thermal expansion. Integral mounting flange and bracketing allows for direct actuation and simple support, while a locking handle can prevent improper positioning.

TKD series 3-way ball valves are available in sizes 1/2" thru 2" in PVC and CPVC with PTFE seats and a choice of EPDM or FPM seals. Both socket and threaded end connections come standard. Full port configurations are available in either a T or L flow pattern.

Proven in the field for more than 20 years, Enpure™ high-purity polypropylene piping systems eliminate the potential for contamination during the conveyance of ultra-pure liquids in facilities such as industrial, hospital and university laboratories, as well as electronics, pharmaceutical and cosmetics manufacturing plants. Enpure™ high-purity pipe is manufactured from FDA-approved, natural, virgin polypropylene and copolymer that can handle corrosive liquids at temperatures from 0°-200°F. Because Enpure™ components are designed as an integrated socket fusion system, no contaminants are created in joining, and making connections as “clean” as any other part of the system. A comprehensive range of pipe, valves and fittings is available in Schedule 40 and Schedule 80 nominal bore sizes from ¼-4”. On a pressurized application, threaded connections should not be used. Under no circumstances should Enpure™ be pressure tested with compressed air or other comprehensible gases.

Proven in the field for more than 20 years, Enpure™ high-purity polypropylene piping systems eliminate the potential for contamination during the conveyance of ultra-pure liquids in facilities such as industrial, hospital and university laboratories, as well as electronics, pharmaceutical and cosmetics manufacturing plants. Enpure™ high-purity pipe is manufactured from FDA-approved, natural, virgin polypropylene and copolymer that can handle corrosive liquids at temperatures from 0°-200°F. Because Enpure™ components are designed as an integrated socket fusion system, no contaminants are created in joining, and making connections as “clean” as any other part of the system. A comprehensive range of pipe, valves and fittings is available in Schedule 40 and Schedule 80 nominal bore sizes from ¼-4”. On a pressurized application, threaded connections should not be used. Under no circumstances should Enpure™ be pressure tested with compressed air or other comprehensible gases.

Proven in the field for more than 20 years, Enpure™ high-purity polypropylene piping systems eliminate the potential for contamination during the conveyance of ultra-pure liquids in facilities such as industrial, hospital and university laboratories, as well as electronics, pharmaceutical and cosmetics manufacturing plants. Enpure™ high-purity pipe is manufactured from FDA-approved, natural, virgin polypropylene and copolymer that can handle corrosive liquids at temperatures from 0°-200°F. Because Enpure™ components are designed as an integrated socket fusion system, no contaminants are created in joining, and making connections as “clean” as any other part of the system. A comprehensive range of pipe, valves and fittings is available in Schedule 40 and Schedule 80 nominal bore sizes from ¼-4”. On a pressurized application, threaded connections should not be used. Under no circumstances should Enpure™ be pressure tested with compressed air or other comprehensible gases.

Proven in the field for more than 20 years, Enpure™ high-purity polypropylene piping systems eliminate the potential for contamination during the conveyance of ultra-pure liquids in facilities such as industrial, hospital and university laboratories, as well as electronics, pharmaceutical and cosmetics manufacturing plants. Enpure™ high-purity pipe is manufactured from FDA-approved, natural, virgin polypropylene and copolymer that can handle corrosive liquids at temperatures from 0°-200°F. Because Enpure™ components are designed as an integrated socket fusion system, no contaminants are created in joining, and making connections as “clean” as any other part of the system. A comprehensive range of pipe, valves and fittings is available in Schedule 40 and Schedule 80 nominal bore sizes from ¼-4”. On a pressurized application, threaded connections should not be used. Under no circumstances should Enpure™ be pressure tested with compressed air or other comprehensible gases.