You Searched For "ipex"

The new ABS SXE has all the same innovative features as the PVC and CPVC versions. This valve features an ultra-compact double block true union design allowing the valve to be easily removed from the piping system and fully serviced. A main seal safe blocked carrier provides improved seal integrity under tough service conditions while the optional EasyFit multifunction handle doubles as a tool for carrier adjustment, and for tightening union nuts precisely.
Duraplus is made from a specially formulated acrylonitrile copolymer, exhibiting high impact strength, outstanding ductility, broad chemical resistance and long-term UV resistance at operating temperatures from -40°F to 158°F, and pressures from 75 to 230 psi (rated at 73ºF).
Half the weight of copper and one-sixth the weight of steel pipe, Duraplus is easy to handle and simple to install using DuraplusTM solvent cement. Extruded pipe and dimensionally matched molded fittings and valves are available from 3/8" to 12".

The new ABS SXE has all the same innovative features as the PVC and CPVC versions. This valve features an ultra-compact double block true union design allowing the valve to be easily removed from the piping system and fully serviced. A main seal safe blocked carrier provides improved seal integrity under tough service conditions while the optional EasyFit multifunction handle doubles as a tool for carrier adjustment, and for tightening union nuts precisely.
Duraplus is made from a specially formulated acrylonitrile copolymer, exhibiting high impact strength, outstanding ductility, broad chemical resistance and long-term UV resistance at operating temperatures from -40°F to 158°F, and pressures from 75 to 230 psi (rated at 73ºF).
Half the weight of copper and one-sixth the weight of steel pipe, Duraplus is easy to handle and simple to install using DuraplusTM solvent cement. Extruded pipe and dimensionally matched molded fittings and valves are available from 3/8" to 12".

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

IPEX Encase systems use polypropylene piping, inside and out, for high corrosion resistance over a broad temperature range. At the heart the IPEX patented Encase polypro system is the Enfield electrofusion fitting with a heavy-gauge resistance wire molded into the socket. This microprocessor controlled fusion system lets you make highly consistent joints in minutes – right in the trench. Available in both flame-retardant and non-flame-retardant PP, the Encase systems modular components are entirely pre-fabricated in the factory. The only joining required is the fusion of couplings to pipe and fittings. The result is a premier off-the-shelf system with substantially lower installation costs, compared to traditional technologies.

The FK offers superior strength as well as excellent chemicalresistance needed to operate in the corrosive environments oftenfound near flanged connections. The special trapezoid shape of theliner and a serrated body cavity guarantee a bubble tight seal whilekeeping break-away torque at an absolute minimum. Double selflubricatingseals (available in either EPDM or FPM), direct actuatormount capability, and choice of a lever handle or mounted gear boxare just a few more features of this technologically advanced valve.The body is made of standard glass-filled PP while discs are availablein PP, PVC, CPVC, PVDF, and ABS.