You Searched For "eaton"
Filter Products
Item # and Description
Manufacturer
Price
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 50 plug type duplex strainer's design is simple and economical. This high-quality strainer is, in fact, a pressure rated plug valve with integral straining baskets. To switch the flow from one basket to the other, the operating handle moves through a 90° arc. Because of the unique port design in the diverter plug, it is impossible for this operation to stop the flow. The entire switching operation takes fewer than 30 seconds, no tools required. Positioning the plug each time in exactly the right spot happens automatically by integral stops. Before operating the handle a specially designed, manual lifting jack built into the strainer, lifts the diverter plug off its seat. After the switching operation, the jack easily reseats the plug, even under high pressures. Because a built-in stop limits the distance the diverter plug rises, it minimizes the possibility of material bypassing the plug while rotated to divert flow. It also prevents debris from building up under the plug and making it difficult to reseat.
Model 50 duplex strainers are ideal for use in the following applications:
Model 50 duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
Eaton's Model 52 duplex strainer offers a large design size with high flow rates that benefit from a set of synchronized, high-quality, butterfly valves that minimize the effort to switch the flow from one basket chamber to the other. The valve replace the diverter plug used on smaller size strainers and gives a straight flow pattern with no sudden changes in flow direction. The result is a very low pressure loss. This is the strainer to choose for high flow rate applications when a low-pressure loss is critical.
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
Eaton's Model 52 duplex strainer offers a large design size with high flow rates that benefit from a set of synchronized, high-quality, butterfly valves that minimize the effort to switch the flow from one basket chamber to the other. The valve replace the diverter plug used on smaller size strainers and gives a straight flow pattern with no sudden changes in flow direction. The result is a very low pressure loss. This is the strainer to choose for high flow rate applications when a low-pressure loss is critical.
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
Eaton's Model 52 duplex strainer offers a large design size with high flow rates that benefit from a set of synchronized, high-quality, butterfly valves that minimize the effort to switch the flow from one basket chamber to the other. The valve replace the diverter plug used on smaller size strainers and gives a straight flow pattern with no sudden changes in flow direction. The result is a very low pressure loss. This is the strainer to choose for high flow rate applications when a low-pressure loss is critical.
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
Eaton's Model 52 duplex strainer offers a large design size with high flow rates that benefit from a set of synchronized, high-quality, butterfly valves that minimize the effort to switch the flow from one basket chamber to the other. The valve replace the diverter plug used on smaller size strainers and gives a straight flow pattern with no sudden changes in flow direction. The result is a very low pressure loss. This is the strainer to choose for high flow rate applications when a low-pressure loss is critical.
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
Eaton's Model 52 duplex strainer offers a large design size with high flow rates that benefit from a set of synchronized, high-quality, butterfly valves that minimize the effort to switch the flow from one basket chamber to the other. The valve replace the diverter plug used on smaller size strainers and gives a straight flow pattern with no sudden changes in flow direction. The result is a very low pressure loss. This is the strainer to choose for high flow rate applications when a low-pressure loss is critical.
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
The Model 52 incorporates a larger screening area by convoluting (pleating) the perforated sheet in the strainer basket, thus increasing the available screening area while reducing the total basket size. Flow enters the basket from the side, not the top, resulting in a straight flow pattern. This means a lower pressure drop and greater time between basket cleanings than would be possible with standard design baskets; a substantial savings in time and operating costs. The lighter weight and smaller profile of this strainer make it ideal for situations when space requirements are tight.
Model 52 is ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 53BTX duplex basket strainer can operate continuously, eliminating the need to shut down processes for cleaning of strainers. When the first basket is full, a unique flow diverter cartridge shifts flow to a second basket to permit removal and cleaning with no interruption to operations. Draining this chamber is easy; the cover lifts and swings clear of the chamber opening with no special tools required. The unique flow diverter cartridge prevents fluid bypass into the out-of-service chamber. It features a dynamic sealing system that ensures exceptionally long seat life and positive sealing. Manual internal or external ball support adjustments are not necessary. The compact, low-profile design fits into spaces ordinary strainers may not, yet it still uses full-size strainer baskets with a low-pressure drop performance. Eaton offers basket openings from 3/4" down to 45 microns. One drain plug is on each side of the housing. Additionally, an easy to access vent valve is in the cover. Standard foot mounting pads ensure a rock solid installation no matter where the strainer operates.
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 53BTX duplex basket strainer can operate continuously, eliminating the need to shut down processes for cleaning of strainers. When the first basket is full, a unique flow diverter cartridge shifts flow to a second basket to permit removal and cleaning with no interruption to operations. Draining this chamber is easy; the cover lifts and swings clear of the chamber opening with no special tools required. The unique flow diverter cartridge prevents fluid bypass into the out-of-service chamber. It features a dynamic sealing system that ensures exceptionally long seat life and positive sealing. Manual internal or external ball support adjustments are not necessary. The compact, low-profile design fits into spaces ordinary strainers may not, yet it still uses full-size strainer baskets with a low-pressure drop performance. Eaton offers basket openings from 3/4" down to 45 microns. One drain plug is on each side of the housing. Additionally, an easy to access vent valve is in the cover. Standard foot mounting pads ensure a rock solid installation no matter where the strainer operates.
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 53BTX duplex basket strainer can operate continuously, eliminating the need to shut down processes for cleaning of strainers. When the first basket is full, a unique flow diverter cartridge shifts flow to a second basket to permit removal and cleaning with no interruption to operations. Draining this chamber is easy; the cover lifts and swings clear of the chamber opening with no special tools required. The unique flow diverter cartridge prevents fluid bypass into the out-of-service chamber. It features a dynamic sealing system that ensures exceptionally long seat life and positive sealing. Manual internal or external ball support adjustments are not necessary. The compact, low-profile design fits into spaces ordinary strainers may not, yet it still uses full-size strainer baskets with a low-pressure drop performance. Eaton offers basket openings from 3/4" down to 45 microns. One drain plug is on each side of the housing. Additionally, an easy to access vent valve is in the cover. Standard foot mounting pads ensure a rock solid installation no matter where the strainer operates.
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining
The Eaton Model 53BTX duplex basket strainer can operate continuously, eliminating the need to shut down processes for cleaning of strainers. When the first basket is full, a unique flow diverter cartridge shifts flow to a second basket to permit removal and cleaning with no interruption to operations. Draining this chamber is easy; the cover lifts and swings clear of the chamber opening with no special tools required. The unique flow diverter cartridge prevents fluid bypass into the out-of-service chamber. It features a dynamic sealing system that ensures exceptionally long seat life and positive sealing. Manual internal or external ball support adjustments are not necessary. The compact, low-profile design fits into spaces ordinary strainers may not, yet it still uses full-size strainer baskets with a low-pressure drop performance. Eaton offers basket openings from 3/4" down to 45 microns. One drain plug is on each side of the housing. Additionally, an easy to access vent valve is in the cover. Standard foot mounting pads ensure a rock solid installation no matter where the strainer operates.
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
Eaton 53 BTX duplex strainers are ideal for use in the following applications:
- Wastewater
- Spray Nozzle Systems
- Heat Exchanger Protection
- Cooling Towers
- Boiler Feed Water
- Machining Fluids
- Deep Well Injection
- Descaling Systems
- Lube Oil Systems
- Irrigation
- Paper Coating
- Refining