You Searched For "georg"
Filter Products
Item # and Description
Manufacturer
Price
The Direct Conductivity/Resistivity Module interfaces Signet 2819-2823 and 2839-2842 Conductivity electrodes directly to the 9900. The module also provides fi ltering and conditioning. (Conductivity/Resistivity and Salinity measurements may also be performed via the 2850 Sensor Electronics connected through the 9900 Digital (S3 L) inputs.)
The H COMM Module enables communication between the 9900 and a HART® enabled device. The HART (Highway Addressable Remote Transducer) Protocol superimposes dig-ital signals on top of the 4 to 20 mA analog signal.
The Batch Module adds batch capability to the 9900 Transmitter (Generation II or later). It is compatible with all Signet fl ow sensors. Up to 10 batch sizes can be stored in one 9900 with customized names and K-Factors available for each batch.
The 4 to 20 mA Output Module adds a second 4 to 20 mA Output to the 9900 Transmitter (Generation III and newer). Each of the outputs can be used to output the primary and/or secondary measurement. Outputs have individual settings available.
The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, conductivity/resistivity, salinity, temperature, pressure, level, dissolved oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo° Signal Converter.
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized on a specific day or days of the week at a specific time.
The 9950 dual channel transmitter is ideal for the following applications:
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized on a specific day or days of the week at a specific time.
The 9950 dual channel transmitter is ideal for the following applications:
- Wastewater Treatment
- Reverse Osmosis
- Deionization
- Chemical Manufacturing/Addition
- Metal and Plastic Finishing
- Fume Scrubbers
- Cooling Towers
- Media Filtration
- Chemical Dosing/Injection
- Aquatic Life Support
- Pools and Fountains
- Rinse Tanks
- Chemical Neutralization
The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, conductivity/resistivity, salinity, temperature, pressure, level, dissolved oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo° Signal Converter.
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized on a specific day or days of the week at a specific time.
The 9950 dual channel transmitter is ideal for the following applications:
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized on a specific day or days of the week at a specific time.
The 9950 dual channel transmitter is ideal for the following applications:
- Wastewater Treatment
- Reverse Osmosis
- Deionization
- Chemical Manufacturing/Addition
- Metal and Plastic Finishing
- Fume Scrubbers
- Cooling Towers
- Media Filtration
- Chemical Dosing/Injection
- Aquatic Life Support
- Pools and Fountains
- Rinse Tanks
- Chemical Neutralization
Series 9950 relay module with (4) mechanical relays for use with series 9950 dual channel transmitter.
The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, conductivity/resistivity, salinity, temperature, pressure, level, dissolved oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo° Signal Converter.
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized on a specific day or days of the week at a specific time.
The 9950 dual channel transmitter is ideal for the following applications:
The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, conductivity/resistivity, salinity, temperature, pressure, level, dissolved oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo° Signal Converter.
The 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow a relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be energized on a specific day or days of the week at a specific time.
The 9950 dual channel transmitter is ideal for the following applications:
- Wastewater Treatment
- Reverse Osmosis
- Deionization
- Chemical Manufacturing/Addition
- Metal and Plastic Finishing
- Fume Scrubbers
- Cooling Towers
- Media Filtration
- Chemical Dosing/Injection
- Aquatic Life Support
- Pools and Fountains
- Rinse Tanks
- Chemical Neutralization