• HQ - 14480 Yorba Ave., Chino, CA 91710
  • 1-800-213-4528
ProductsTanksCone Bottom Tanks

Cone Bottom Tanks

Cone Bottom Tanks

162 products found

Show products per page

Sort By:

Select products then
Change Display:

Showing 1 - 40 of 162

Page 1 of 5 Next >>

Go to page:

Filter Products
Secondary Sub Category
Manufacturer
Material
Series
Type of product
Product Color
CONE DEGREE
Diameter
Height
Manway Size
Secific Gravity
Capacity
Connection Size
Options
Item # and Description
Manufacturer
Price
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Tank stand to be purchased in conjunction with Snyder Total Drain Tank. All tank stands are constructed of High density linear polyethylene and are coated with black water based enamel paint with rust inhibitor. All stands are seismic approved, however, you must use designated stand where gallonage is indicated.
Snyder Industries
Quantity: 
Long lasting, corrosion resistant tank systems provide maximum options for batch mixing, storage, dispensing and material handling. Welded and mechanically fastened fittings can be installed in the bottom of tanks to provide complete drainage while sitting on stands. 100% HDLPE Material Construction complies with FDA Regulation 177.1520 and National Sanitation Foundation (NSF) 61 standards. Total Drain Tanks must be ordered with the corresponding plastic stand - no exceptions.
Snyder Industries
Quantity: 
Long lasting, corrosion resistant tank systems provide maximum options for batch mixing, storage, dispensing and material handling. Welded and mechanically fastened fittings can be installed in the bottom of tanks to provide complete drainage while sitting on stands. 100% HDLPE Material Construction complies with FDA Regulation 177.1520 and National Sanitation Foundation (NSF) 61 standards. Total Drain Tanks must be ordered with the corresponding plastic stand - no exceptions.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.
Snyder Industries
Quantity: 
Snyder cone bottom tanks are available in 30°, 45° and 60° slopes with sizes ranging from 15 to 13,000 gallons. Most tanks are available with optional IBC/CBC seismic and 150 mph wind restraint cable tie-down systems. Specific gravity rating are based on the industry's most severe calculation, with standard gravity choices of 1.5 and 1.9, other ratings are available upon request. The maximum recommended operating temperature for cone bottom tanks is 100°F.

Snyder Cone Bottom tanks are available in the following materials:
  • High-density linear polyethylene (HDLPE) in either black or natural white color - FDA Regulation 177.1520 and NSF/ANSI 61 standard compliant
  • Cross-linked, high-density polyethylene (XLPE) in either black or natural white color
  • Opaque white UV block out resin #880059 for outdoor Sodium Hypochlorite applications. Available in vertical tanks up to 12,500 gallons
  • Sulfuric acid resin #880046. Available for all size vertical tanks except for 16,500 gallons


All materials are UV stabilized for long-term outdoor service.

Page of 5 Next >>

Close Menu