Tubing, 4mm OD x 2mm ID x 1mm Wall, PFA Construction, Clear, 1' Length

THV FLEX (tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride) tubing has a unique combination of properties making it the preferred choice for many applications. ALTAFLUOR 350 THV Flex tubing is ideal for use in applications requiring excellent UV light transmission combined with the safety and flexibility of plastic. ALTAFLUOR 350THV FLEX tubing has the flexibility of traditional PVC flex tubing combined with chemical resistance much closer to that of FEP. THV is available in a variety of compositions each designed for specific performance values. ALTAFLUOR 350 THV FLEX SERIES is produced exclusively from DYNEON THV 221 grade resin which allows for greatest flexibility, permeation resistance and good chemical resistance, but with slightly reduced upper service temperature over other grades. ALTAFLUOR 350 also has excellent Bondability with other materials which allows for multi-layer extrusions.

Typical applications for THV Flex Tubing are:

• Automotive Fuel Transport Systems
• Laboratory
• Solar Energy
• UV Purification Systems
• Fiber Optic
• Chemical Process

MFA (perfluoro methyl alkoxy) is a co-polymer of terafluoroethylene and perfluoromethyl vinyl ether. MFA is similar in characteristics and performance to PFA. ALTAFLUOR 600 MFA Tubing and pipe products have superior clarity over standard PFA products. Like PFA resins, ALTAFLUOR 600 resins provide excellent stress crack and chemical resistance. It has purity levels equal or better than most standard PFA resins. Additionally, the ultra-smooth surface finish of ALTAFLUOR 600 tubing products make them ideal for applications requiring quick and easy clean out. ALTAFLUOR 600 MFA tubing is recommended for applications involving UV transmission and visible spectrums. For chemical applications not exceeding 480 °F, ALTAFLUOR 600 tubing and pipe may prove to be cost effective options. ALTAFLUOR 600 tubing may be used with flare or conventional fittings. ALTAFLUOR600 MFA PIPE may be joined using conventional threaded fittings or welded.

Typical applications for ALTAFLUOR 600 Tubing are:

• Chemical Process
• Paint Spray
• Electrical Insulation
• Heat Exchangers
• Semiconductor
• Automotive

PTFE (polytetrafluoroethylene) is the original Teflon® material first developed by E.I. DuPont Co. PTFE tubing is the most flexible of all fluoropolymer tubing offered. ALTAFLUOR 100 PTFE tubing has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction & lubricity make the tubing, pipe or rod ideal for bushing or bearing applications. Tubing coil and reel lengths may be limited due to batch size – please call to confirm available tubing lengths at time of order. ALTAFLUOR 100 PTFE tubing is compatible with most standard fittings (not suitable for use with flare-type fittings).

Typical applications for ALTAFLUOR 100 PTFE Tubing are:

• Laboratory
• Chemical Process
• Analytical and Process Equipment
• Emissions Monitoring
• Cryogenic
• High Temperature
• Electrical
• Ozone
• Automotive Paint Spray
• Automotive Push-Pull Cables
• Automotive Hose Assemblies

FEP (fluorinated ethylene propylene) tubing is an economical choice for tubing applications requiring chemical resistance in combination with broad temperature exposure. ALTAFLUOR 200 FEP tubing and pipe offer excellent clarity which makes them ideal for sight glass and other flow monitoring applications. Additionally, the outstanding UV transmission rate of FEP makes the tubing a clear choice for UV water purification systems in straight lengths or coiled hose constructions. ALTAFLUOR 200 tubing may be used with flare or conventional fittings. ALTAFLUOR 200 FEP pipe may be joined using conventional threaded fittings or welded. Convoluted FEP Tubing is available in standard and Ultra-Flex options.

PFA (perfluoroalkoxy) is the tubing of choice for applications involving extreme chemical resistance combined with high temperature exposure. ALTAFLUOR 400® tubing and pipe are made exclusively from the highest molecular weight resins available giving them superior physical properties. ALTAFLUOR 400 PFA tubing is suitable for even the most demanding applications. ALTAFLUOR 400 PFA pipe may be used with conventional threaded fittings or welded. ALTAFLUOR 400 is compatible with flare or conventional type fittings. For applications where reduced permeation is critical, please contact Altaflo for information on our new Low Permeation PFA Tubing.

Typical applications for ALTAFLUOR 400 PFA Pipe are:

• Chemical Process
• Heat Exchangers
• Laboratory Applications
• Semiconductor
• Flow Monitoring
• Emissions Monitoring
• Double Containment Systems
• Food Processing
• Electrical Insulation
• Automotive Hose
• Automotive Paint Spray