Replaceable Thermal Protector, Model P1, Red Wire, up to 190°F (up to 88° C) Temperature Range for Metal Over the Side Heaters
Item #6032-26-R
- Replaceable and resettable thermal overload protection types available
- Styles to meet several temperature variations from 180° F to 300° F
- Single or three phase options (specify when ordering)
Process Technologies offers replaceable or resettable thermal overload protection for all of their heaters.
Protector 1 Series:
The Protector 1 overtemperature control system utilizes a heat sensitive fuse to detect overheat conditions. The protector, placed inside a thermowell, positioned in contact with the heater sheath, will cut power to the heater in the event of low liquid level.
Protector 2 and 3 Series:
The Protector 2 and 3 systems provide the same reliable overtemperature protection as the Protector 1, however, the control systems feature a heat sensing thermostat. If the liquid level drops and the heater reaches a preset overheat temperature, the thermostat cuts power to the heater and an audible alarm activates. After filling the tank, the immersion heater can quickly be made operational by pushing the reset button on the control to restore power. Protector 3 is designed for flexible lead or high temperature fluoropolymer (PTFE) heater applications only. DO NOT wire P2, P6, P7 or P8 devices directly to power or heater load, as a dangerous short circuit will result with irreparable damage to the heater. Refer to wiring diagrams for proper installation.
Additional Documents:
